Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 24-1
Publication Number: 53-1000242-01
Chapter
24
FSSM System Messages
FSSM-1002
Message
Probable
Cause
Indicates that the HA state for the active CP is in synchronization with the HA state of the standby CP.
If the standby CP is healthy, then a failover is nondisruptive. For more information on the haFailover
command, refer to the Fabric OS Command Reference.
Recommended
Action
No action is required.
Severity INFO
FSSM-1003
Message
Probable
Cause
Indicates that the HA state for the active CP is out of synchronization with the HA state of the standby
CP. If the active CP failover occurs when the HA state is out of sync, the failover is disruptive.
Recommended
Action
If this message was logged as a result of a user-initiated action (such as running the switchReboot
command), then no action is required.
Otherwise, issue the haSyncStart command on the active CP and try resynchronizing the HA state. If
the HA state does not become synchronized, run the haDump command to diagnose the problem.
Severity WAR NIN G
<timestamp>, [FSSM-1002], <sequence-number>,, INFO, <system-name>,
HA State is in sync
<timestamp>, [FSSM-1003], <sequence-number>,, WARNING, <system-
name>, HA State out of sync