Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-5
Publication Number: 53-1000242-01
FW-1012
25
Severity INFO
FW-1012
Message
Probable
Cause
Indicates that the power supply counter changed from a value outside of the acceptable range to a value
within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1033
Message
Probable
Cause
Indicates that the temperature of the SFP has changed. Frequent fluctuations in SFP temperature might
indicate a deteriorating SFP.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1034
Message
Probable
Cause
Indicates that the temperature of the SFP has fallen below the low boundary.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
<timestamp>, [FW-1012], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1033], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1034], <sequence-number>,, WARNING, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.