Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-9
Publication Number: 53-1000242-01
FW-1043
25
FW-1043
Message
Probable
Cause
Indicates that the transmit power value of the SFP has risen above the high boundary. The transmit
performance area measures the amount of outgoing laser to help you determine if the SFP is in good
working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating.
Recommended
Action
Replace the SFP.
Severity WAR NIN G
FW-1044
Message
Probable
Cause
Indicates that the transmit power value of the SFP has changed from a value outside of the acceptable
range to a value within the acceptable range. The transmit performance area measures the amount of
outgoing laser to help you determine if the SFP is in good working condition or not. If the counter often
exceeds the threshold, the SFP is deteriorating.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1045
Message
Probable
Cause
Indicates that the value of the SFP voltage has changed. If the supplied voltage of the SFP transceiver is
outside of the normal range, this might indicate a hardware failure.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. Frequent messages indicate that you must replace the SFP.
<timestamp>, [FW-1043], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1044], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1045], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.