Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-13
Publication Number: 53-1000242-01
FW-1115
25
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1115
Message
Probable
Cause
Indicates that the number of times E_Ports have gone down has risen above the high boundary. E_Ports
go down each time you remove a cable or SFP. SFP failures also cause E_Ports to go down. E_Port
downs might be caused by transient errors.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. Check both ends of the physical connection and verify that the SFP functions properly.
Severity INFO
FW-1116
Message
Probable
Cause
Indicates that the number of times E_Ports have gone down has changed from a value outside of the
acceptable range to a value within the acceptable range. E_Ports go down each time you remove a cable
or SFP. SFP failures also cause E_Ports to go down. E_Port downs might be caused by transient errors.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1117
Message
<timestamp>, [FW-1115], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1116], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1117], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.