Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-14 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1118
25
Probable
Cause
Indicates that the number of fabric reconfigures has changed. The following actions can cause a fabric
reconfiguration:
• two switches with the same domain ID have connected to one another.
• two fabrics have joined.
• an E_Port has gone offline.
• a principal link has segmented from the fabric.
Recommended
Action
Verify that the cable is properly connected at both ends. Verify that the SFPs have not become faulty. An
inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting.
Severity INFO
FW-1118
Message
Probable
Cause
Indicates that the number of fabric reconfigures has fallen below the low boundary. The following
occurrences can cause a fabric reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
A low number of fabric reconfigurations means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1119
Message
Probable
Cause
Indicates that the number of fabric reconfigures has risen above the high boundary. The following
occurrences can cause a fabric reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
<timestamp>, [FW-1118], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1119], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.