Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-20 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1132
25
FW-1132
Message
Probable
Cause
Indicates that the number of zone changes has changed from a value outside of the acceptable range to a
value within the acceptable range. Zone changes occur when there is a change to the effective zone
configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1133
Message
Probable
Cause
Indicates that the number of fabric logins has changed. Fabric logins occur when a port or device
initializes with the fabric. The event is called a fabric login or FLOGI.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1134
Message
Probable
Cause
Indicates that the number of fabric logins has fallen below the low boundary. Fabric logins occur when
a port or device initializes with the fabric. The event is called a fabric login or FLOGI. A low number of
fabric logins means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
<timestamp>, [FW-1132], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1133], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1134], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.