Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-21
Publication Number: 53-1000242-01
FW-1135
25
FW-1135
Message
Probable
Cause
Indicates that the number of fabric logins has risen above the high boundary. Fabric logins occur when a
port or device initializes with the fabric. The event is called a fabric login or FLOGI.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1136
Message
Probable
Cause
Indicates that the number of fabric logins has changed from a value outside of the acceptable range to a
value within the acceptable range. Fabric logins occur when a port or device initializes with the fabric.
The event is called a fabric login or FLOGI.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1137
Message
Probable
Cause
Indicates that the number of SFP state changes has changed. SFP state changes occur when the SFP is
inserted or removed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
<timestamp>, [FW-1135], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1136], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1137], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.