Manualshelf

Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP DC SAN Director Switch 16-port 8Gb Fibre Channel Blade Option
231232233234235236237238239240
Fabric OS Message Reference 25-25
Publication Number: 53-1000242-01
FW-1165
25
FW-1165
Message
Probable
Cause
Indicates that the number of synchronization losses that the port experiences has fallen below the low
boundary. Loss of synchronization errors frequently occur due to a faulty SFP or cable. Signal losses
often create synchronization losses.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. A low number of synchronization losses means that the switch is functioning normally.
Severity INFO
FW-1166
Message
Probable
Cause
Indicates that the number of synchronization losses that the port experiences has risen above the high
boundary. Loss-of-synchronization errors frequently occur due to a faulty SFP or cable. Signal losses
often create synchronization losses.
Recommended
Action
Check both ends of your cable connection. Verify that the cable and SFPs are not faulty.
If you continue to experience loss-of-synchronization errors, troubleshoot your HBA and contact your
switch service provider.
Severity WAR NIN G
FW-1167
Message
Probable
Cause
Indicates that the number of synchronization losses that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range. Loss of synchronization errors
frequently occur due to a faulty SFP or cable. Signal losses often create synchronization losses.
<timestamp>, [FW-1165], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1166], <sequence-number>,, WARNING, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1167], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.