Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-27
Publication Number: 53-1000242-01
FW-1171
25
Recommended
Action
Check both ends of your cable connection. Verify that the cable is not faulty.
Severity WAR NIN G
FW-1171
Message
Probable
Cause
Indicates that the number of signal losses that the port experiences has changed from a value outside of
the acceptable range to a value within the acceptable range. Loss of signal generally indicates a physical
problem.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. Frequent loss of signal generally indicates a physical problem.
Check both ends of your cable connection. Verify that the cable and SFPs are not faulty.
Severity INFO
FW-1172
Message
Probable
Cause
Indicates that the number of protocol errors that the port experiences has changed. Occasional protocol
errors occur due to software glitches. Persistent protocol errors occur due to hardware problems.
Recommended
Action
Check both ends of your cable connection. Verify that the cable and SFPs are not faulty.
Severity INFO
FW-1173
Message
<timestamp>, [FW-1171], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1172], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1173], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.