Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-45
Publication Number: 53-1000242-01
FW-1300
25
FW-1300
Message
Probable
Cause
Indicates that the number of HTTP violations has changed. HTTP violations indicate that a browser
connection request has been received from an unauthorized IP address. The HTTP_POLICY contains a
list of TCP/IP addresses that are authorized to establish browser connections to the switches in the
fabric. The IP addresses use the standard "dot" notation (for example, 255.255.255.255).
Recommended
Action
Run the errShow command to determine the IP address that sent the request. Responses to security-
class messages depend on user policies. Consult your security administrator for response strategies and
policies.
Severity INFO
FW-1301
Message
Probable
Cause
Indicates that the number of HTTP violations has fallen below the low boundary. HTTP violations
indicate that a browser connection request has been received from an unauthorized IP address. The
HTTP_POLICY contains a list of TCP/IP addresses that are authorized to establish browser connections
to the switches in the fabric. The IP addresses use the standard "dot" notation (for example,
255.255.255.255).
Recommended
Action
No action is required.
Severity INFO
FW-1302
Message
<timestamp>, [FW-1300], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1301], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1302], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.