Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-46 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1303
25
Probable
Cause
Indicates that the number of HTTP violations has risen above the high boundary. HTTP violations
indicate that a browser connection request has been received from an unauthorized IP address. The
HTTP_POLICY contains a list of TCP/IP addresses that are authorized to establish browser connections
to the switches in the fabric. The IP addresses use the standard "dot" notation (for example,
255.255.255.255).
Recommended
Action
Run the errShow command to determine the IP address that sent the request. Responses to security-
class messages depend on user policies. Consult your security administrator for response strategies and
policies.
Severity WAR NIN G
FW-1303
Message
Probable
Cause
Indicates that the number of HTTP violations has changed from a value outside of the acceptable range
to a value within the acceptable range. HTTP violations indicate that a browser connection request has
been received from an unauthorized IP address. The HTTP_POLICY contains a list of TCP/IP
addresses that are authorized to establish browser connections to the switches in the fabric. The IP
addresses use the standard "dot" notation (for example, 255.255.255.255).
Recommended
Action
No action is required.
Severity INFO
FW-1304
Message
Probable
Cause
Indicates that the number of API violations has changed. API violations indicate that an API connection
request has been received from an unauthorized IP address. The SNMP_POLICY contains a list of
TCP/IP addresses that are authorized to establish API connections to switches in the fabric. The IP
addresses use standard "dot" notation (for example, 255.255.255.255).
Recommended
Action
Run the errShow command to determine the IP address that sent the request. Responses to security-
class messages depend on user policies. Consult your security administrator for response strategies and
policies.
Severity INFO
<timestamp>, [FW-1303], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1304], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.