Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-74 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1376
25
Probable
Cause
Indicates that the number of incompatible security database violations has changed from a value outside
of the acceptable range to a value within the acceptable range. This violation indicates the number of
secure switches with different version stamps have been detected. When a switch is in secure mode, it
connects only to another switch that is in secure mode and has a compatible security database. A
compatible security database means that the version stamp and FCS policy matches exactly.
Recommended
Action
No action is required.
Severity INFO
FW-1376
Message
Probable
Cause
Indicates that the number of illegal commands has changed. This counter tracks how many times
commands allowed only on the primary FCS switch have been executed on a non-primary FCS switch.
There are many commands that can be executed only on the primary FCS switch as well as one security
command that can be executed only on a backup FCS switch. The counter increments every time
someone issues one of these commands on a switch where it is not allowed.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity INFO
FW-1377
Message
Probable
Cause
Indicates that the number of illegal commands has fallen below the low boundary. This counter tracks
how many times commands allowed only on the primary FCS switch have been executed on a non-
primary FCS switch. There are many commands that can be executed only on the primary FCS switch
as well as one security command that can be executed only on a backup FCS switch. The counter
increments every time someone issues one of these commands on a switch where it is not allowed.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [FW-1376], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1377], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.