Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)
26-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
HAM-1004
26
HAM-1004
Message
Probable
Cause
This message records switch processor reboot reasons that were initiated by the user or the switch
errors. The switch reboots can be initiated by the firmwareDownload, fastBoot, haFailover, and
reboot commands. Some examples of errors that might initiate this message are hardware errors,
software errors, compact flash errors, or memory errors. The reboot reasons can be any of the
following:
• Hafailover
• Unknown
• Fastboot
• Giveup Master:SYSM
• CP Faulty:SYSM
• FirmwareDownload
• ConfigDownload:MS
• ChangeWWN:EM
• Reboot:WebTool
• Fastboot:WebTool
• Software Fault:Software Watchdog
• Software Fault:Kernel Panic
• Software Fault:ASSERT
• Reboot:SNMP
• Fastboot:SNMP
• Reboot
• Chassis Config
• Reboot:API
• Reboot:HAM
• EMFault:EM
Recommended
Action
Check the error log on both CPs for additional messages that might indicate the reason for the reboot.
Severity INFO
<timestamp>, [HAM-1004], <sequence-number>,, INFO, <system-name>,
Processor rebooted - <Reboot Reason>