Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

28-12 Fabric OS Message Reference
Publication Number: 53-1000242-01
HIL-1404
28
HIL-1404
Message
Probable
Cause
Indicates that one or more fan FRUs have been removed.
Recommended
Action
Install the missing fan FRUs immediately.
Severity WAR NIN G
HIL-1501
Message
Probable
Cause
Indicates that the temperature of this blade has risen above the warning threshold.
Recommended
Action
Run the fanShow command to verify all the fans are working properly.
Make sure that the area is well ventilated and that the room temperature is within operational range of
your switch. Refer to the hardware reference manual for your switch for the operational temperature
range.
Severity WAR NIN G
HIL-1502
Message
Probable
Cause
Indicates that the temperature of this blade has risen above the critical threshold. This usually follows a
high-temperature message.
Recommended
Action
Run the fanShow command to verify all the fans are working properly.
<timestamp>, [HIL-1404], <sequence-number>,, WARNING, <system-
name>, <count> fan FRU(s) missing. Install fan FRU(s) immediately.
<timestamp>, [HIL-1501], <sequence-number>,, WARNING, <system-
name>, Slot <slot number>, high temperature (<measured
temperature>).
<timestamp>, [HIL-1502], <sequence-number>, FFDC, CRITICAL,
<system-name>, Slot <slot number>, high temperature (<measured
temperature>). Unit will be shut down in 2 minutes if temperature
remains high.