Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

33-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
ICPD-1004
33
Recommended
Action
No action is required.
Severity INFO
ICPD-1004
Message
Probable
Cause
Indicates that iSNS Client service is enabled on multiple switches in fabric.
Recommended
Action
Enable the iSNS Client service on a single switch in the fabric using the fosConfig command. Refer to
the Fabric OS Command Reference for more information on this command.
Severity WAR NIN G
ICPD-1005
Message
Probable
Cause
Indicates that iSCSI switches in the fabric have different configurations in AUTH, VT, or DD.
Recommended
Action
Sync up the configuration in the fabric using the iscsiCfg command. Refer to the Fabric OS Command
Reference for more information on this command.
Severity WAR NIN G
ICPD-1006
Message
Probable
Cause
Indicates that the iSCSI service is enabled or disabled on the switch.
<timestamp>, [ICPD-1004], <sequence-number>,, WARNING, <system-
name>, iSNS Client service is detected on multiple switches in
fabric.
<timestamp>, [ICPD-1005], <sequence-number>,, WARNING, <system-
name>, iSCSI configuration between local switch (<local domain id>)
and peer (<peer domain id>) is out of sync. iSCSI login is not
allowed.
<timestamp>, [ICPD-1006], <sequence-number>,, INFO, <system-name>,
iSCSI service is <status> on the switch.