Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 34-1
Publication Number: 53-1000242-01
Chapter
34
IPS System Messages
IPS-1001
Message
Probable
Cause
Indicates that the FCIP license is not installed on the switch.
Recommended
Action
Run the licenseShow command to check the installed licenses on the switch. Contact your switch
supplier for a FCIP license. Run the licenseAdd command to add the license to your switch.
Severity WAR NIN G
IPS-1002
Message
Probable
Cause
Indicates that an initialization of a module within the IPS daemon failed.
Recommended
Action
Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS
Command Reference for more information on this command.
Severity ERROR
IPS-1003
Message
<timestamp>, [IPS-1001], <sequence-number>,, WARNING, <system-
name>, <message> FCIP License Not Installed (<error>)
<timestamp>, [IPS-1002], <sequence-number>,, ERROR, <system-name>,
Failed to initialize <module> rc = <error>
<timestamp>, [IPS-1003], <sequence-number>,, WARNING, <system-
name>, <function name>(): Failed to allocate memory while
performing <message>