Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

41-2 Fabric OS Message Reference

Publication Number: 53-1000242-01

MFIC-1003

Message

Probable

Cause

Indicates that one or more switches joined the fabric with a different insistent domain ID (IDID) mode

setting than the current effective IDID mode for the fabric. This message also occurs when the IDID for

the fabric has been turned on or off. The possible values for state are "On" or "Off".

Recommended

Action

IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured with

the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is for

information purposes only, and no action is required.

IDID mode can be set using the configure command in the CLI or checking the Advanced Web Tools

Switch Admin > Configure Tab > Fabric Subtab > Insistent Domain ID Mode checkbox. The

switch must be disabled to change the IDID mode.

Severity WAR NIN G

<timestamp>, [MFIC-1003], <sequence-number>,, WARNING, <system-

name>, Effective Insistent domain ID for the fabric changed from