Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 46-1
Publication Number: 53-1000242-01
Chapter
46
NS System Messages
NS-1001
Message
Probable
Cause
Indicates that the response payload exceeds the maximum frame size that the remote switch can handle.
Recommended
Action
Run the firmwareDownload command to upgrade the remote switch with firmware v4.3 or higher, or
v3.2 or higher, as appropriate for the switch type, so that it can support GMI to handle frame
fragmentation and reassembly.
You can also reduce the number of devices connected to the local switch.
Severity WAR NIN G
NS-1002
Message
Probable
Cause
Indicates that the local switch cannot interact with the remote switch due to incompatible or obsolete
firmware.
Recommended
Action
Run the firmwareDownload command to upgrade the remote switch to the latest level of firmware.
Severity WAR NIN G
<timestamp>, [NS-1001], <sequence-number>,, WARNING, <system-name>,
The response for request 0x<CT command code> from remote switch
0x<Domain Id> is larger than the max frame size the remote switch
can support!
<timestamp>, [NS-1002], <sequence-number>,, WARNING, <system-name>,
Remote switch 0x<Domain Id> has firmware revision lower than 2.2:
<Firmware Revision 1st character><Firmware Revision 2nd
character><Firmware Revision 3rd character><Firmware Revision 4th
character> which is not supported!