Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

46-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
NS-1003
46
NS-1003
Message
Probable
Cause
Indicates that the name server on the standby CP has lower supported capability than the active CP due
to different firmware versions running on the active and standby CPs. This means that the active and
standby CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will
be disruptive.
Recommended
Action
To avoid disruption of traffic in the event of an unplanned failover, schedule a firmwareDownload so
that the active and standby CPs have the same firmware version.
Reduce the local device count to follow the capability of the lowest version of firmware.
Severity INFO
NS-1004
Message
Probable
Cause
Indicates that the name server on the standby CP has lower supported capability than the active CP due
to different firmware versions running on the active and standby CPs. This means that the active and
standby CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will
be disruptive.
Recommended
Action
To avoid disruption of traffic in the event of an unplanned failover, schedule a firmwareDownload so
that the active and standby CPs have the same firmware version.
Reduce the local device count to follow the capability of the lowest version of firmware.
Severity INFO
<timestamp>, [NS-1003], <sequence-number>,, INFO, <system-name>,
Number of local devices <Current local device count>, exceeds the
standby can support <Local device count that standby can support>,
can't send update.
<timestamp>, [NS-1004], <sequence-number>,, INFO, <system-name>,
Number of local devices <Current local device count>, exceeds the
standby can support <Local device count that standby can support>,
can't sync.