Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 47-5
Publication Number: 53-1000242-01
PDM-1013
47
Probable
Cause
Indicates that the PDM process could not write data to the specified file name.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
PDM-1013
Message
Probable
Cause
Indicates that the switch configuration file /etc/fabos/fabos.[0|1].conf is empty.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
PDM-1014
Message
Probable
Cause
Indicates that a system call failed.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
PDM-1017
Message
<timestamp>, [PDM-1013], <sequence-number>,, WARNING, <system-
name>, File empty: <File Name>
<timestamp>, [PDM-1014], <sequence-number>,, WARNING, <system-
name>, Access sysmod failed
<timestamp>, [PDM-1017], <sequence-number>, FFDC, CRITICAL,
<system-name>, System (<Error Code>): <Command>