Manualshelf

Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP DC SAN Director Switch 16-port 8Gb Fibre Channel Blade Option
371372373374375376377378379380
Fabric OS Message Reference 49-1
Publication Number: 53-1000242-01
Chapter
49
PLAT System Messages
PLAT-1000
Message
Probable
Cause
Indicates that nonrecoverable PCI errors have been detected.
Recommended
Action
The system will be faulted and might automatically reboot.
If the system does not reboot, then try issuing the reboot command from a command-line prompt.
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity CRITICAL
PLAT-1001
Message
Probable
Cause
Indicates that the standby CP is being reset. This message is typically generated by a CP that is in the
process of becoming the active CP. Note that in certain circumstances a CP may experience a double
reset and reboot twice in a row. A CP can recover automatically even if it has rebooted twice.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [PLAT-1000], <sequence-number>, FFDC, CRITICAL,
<system-name>, <Function name> <Error string>
<timestamp>, [PLAT-1001], <sequence-number>,, INFO, <system-name>,
Resetting standby CP (double reset may occur)