Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 51-1
Publication Number: 53-1000242-01
Chapter
51
PS System Messages
PS-1000
Message
Probable
Cause
Indicates that an unexpected software error has occurred in Advanced Performance Monitoring. The
Performance Monitor has failed to initialize.
Recommended
Action
The CP should reboot (or fail over) automatically. If it does not, reboot or power cycle the switch to
reinitiate the firmware.
Severity CRITICAL
PS-1001
Message
Probable
Cause
Indicates that the PID format was changed.
Recommended
Action
No action is required. Refer to the Fabric OS Administrator’s Guide for more information about the
PID format.
Severity INFO
PS-1002
Message
<timestamp>, [PS-1000], <sequence-number>, FFDC, CRITICAL, <system-
name>, Failed to initialize Advanced Performance Monitoring.
<timestamp>, [PS-1001], <sequence-number>,, INFO, <system-name>,
Advanced Performance Monitoring configuration updated due to change
in PID format
<timestamp>, [PS-1002], <sequence-number>,, INFO, <system-name>,
Failed to initialize the tracing system for Advanced Performance
Monitoring.