Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

54-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
RCS-1003
54
RCS-1003
Message
Probable
Cause
Indicates that the specified RCS function failed to allocate memory.
Recommended
Action
This message is usually transitory. Wait a few minutes and retry the command.
Check memory usage on the switch using the memShow command.
Reboot or power cycle the switch.
Severity ERROR
RCS-1004
Message
Probable
Cause
Indicates that a specified application did not register with RCS.
Recommended
Action
Run the haShow command to view the HA state.
Run the haDisable and the haEnable commands.
Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS
v2.6, v3.1 and greater, v4.1 and greater.
Run the firmwareDownload command to upgrade the firmware for any switches that do not support
RCS.
Severity ERROR
RCS-1005
Message
Probable
Cause
Indicates that a receiving switch is rejecting an RCS phase.
<timestamp>, [RCS-1003], <sequence-number>,, ERROR, <system-name>,
Failed to allocate memory: (<function name>)
<timestamp>, [RCS-1004], <sequence-number>,, ERROR, <system-name>,
Application(<application name>) not registered.(<error string>)
<timestamp>, [RCS-1005], <sequence-number>,, INFO, <system-name>,
Phase <RCS phase>, <Application Name> Application returned <Reject
reason>, 0x<Reject code>.