Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 54-3
Publication Number: 53-1000242-01
RCS-1006
54
Recommended
Action
If the reject is in ACA phase, wait several minutes and then retry the operation from the sender switch.
If the reject is in the SFC phase, check if the application license exists for the local domain and if the
application data is compatible.
Severity INFO
RCS-1006
Message
Probable
Cause
Indicates that a remote domain rejected an RCS phase initiated by an application on the local switch.
If the reject phase is ACA, the remote domain might be busy and could not process the new request.
If the reject phase is SFC, the data sent by the application might not be compatible or the domain does
not have the license to support that application.
Recommended
Action
If the reject is in ACA phase, wait several minutes and then retry the operation.
If the reject is in the SFC phase, check if the application license exists for the remote domain and if the
application data is compatible.
Severity INFO
RCS-1007
Message
Probable
Cause
Indicates that a domain cannot handle the zone database being committed.
Recommended
Action
Reduce the zone database size.
Severity ERROR
<timestamp>, [RCS-1006], <sequence-number>,, INFO, <system-name>,
State <RCS phase>, Application <Application Name> AD<Administrative
Domain>, RCS CM. Domain <Domain ID that sent the reject> returned
0x<Reject code>.
<timestamp>, [RCS-1007], <sequence-number>,, ERROR, <system-name>,
Zone DB size and propogation overhead exceeds domain <domain
number>'s maximum supported Zone DB size <max zone db size>. Retry
after reducing the Zone DB size.