Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

58-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
SEC-1003
58
Severity ERROR
SEC-1003
Message
Probable
Cause
Indicates that the specified domain number failed to download security data after the specified number
of attempts. The primary switch will segment the failed switch after 30 tries. The failed switch might
have had some internal error and failed to accept the database download.
Recommended
Action
Reset the version stamp on the switch to 0 using the secVersionReset command and then rejoin the
switch to the fabric.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
SEC-1005
Message
Probable
Cause
Indicates that the primary FCS received a data request from the specified domain. For example, if the
switch fails to update the database or is attacked (data injection), a message is generated to the primary
FCS to try to correct and resync with the rest of the switches in the fabric.
Recommended
Action
Use the secFabricShow command to verify that the fabric is not being attacked by unauthorized users.
Severity INFO
SEC-1006
Message
Probable
Cause
Indicates that invalid data has been received for any statistic-related command for security
(secStatsShow or secStatsReset). The counter is updated automatically when a security violation
occurs. This message might also occur if the updating counter fails.
<timestamp>, [SEC-1003], <sequence-number>,, WARNING, <system-
name>, Fail to download security data to domain <Domain number>
after <Number of retires> retries
<timestamp>, [SEC-1005], <sequence-number>,, INFO, <system-name>,
Primary FCS receives data request from domain <Domain number>
<timestamp>, [SEC-1006], <sequence-number>,, WARNING, <system-
name>, Security statistics error: Failed to reset due to invalid
<data>.