Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 58-33
Publication Number: 53-1000242-01
SEC-1124
58
SEC-1124
Message
Probable
Cause
Indicates that a secure mode disable is attempted in a non-secure fabric.
Recommended
Action
No action is required.
Severity INFO
SEC-1126
Message
Probable
Cause
Indicates that a secure mode disable operation completed successfully.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-1130
Message
Probable
Cause
Indicates that an FCS failover operation was completed successfully.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
<timestamp>, [SEC-1124], <sequence-number>,, INFO, <system-name>,
Secure Mode is off.
<timestamp>, [SEC-1126], <sequence-number>,, INFO, <system-name>,
Secure mode has been disabled.
<timestamp>, [SEC-1130], <sequence-number>,, INFO, <system-name>,
The Primary FCS has failed over to a new switch.