Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

58-36 Fabric OS Message Reference
Publication Number: 53-1000242-01
SEC-1145
58
Probable
Cause
Indicates that the new polices are rejected due to the reason specified.
Recommended
Action
Use proper syntax when entering policy information.
Severity INFO
SEC-1145
Message
Probable
Cause
Indicates one of the following has occurred:
• The names for the specified policies have changed.
• The passwords have changed for the specified accounts.
• The SNMP community strings have been changed.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-1146
Message
Probable
Cause
Indicates that the PID format of the switch was changed either to extended-edge PID or from extended-
edge PID. If the DCC polices existed, all index/area ID values either increased or decreased by 16. The
values wrap around after 128. If a DCC policy contains an index/area of 127 before changing to
extended-edge PID, then the new index/area is 15, because of the wraparound.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [SEC-1145], <sequence-number>,, INFO, <system-name>, A
security admin event has occurred. This message is for information
purpose only. The message for individual event is: <Event specific
data>
<timestamp>, [SEC-1146], <sequence-number>,, INFO, <system-name>,
PID changed: <State>.