Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 58-39
Publication Number: 53-1000242-01
SEC-1159
58
Recommended
Action
Enter a valid name.
Severity INFO
SEC-1159
Message
Probable
Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity INFO
SEC-1160
Message
Probable
Cause
Indicates that duplicate port member exists in the given portlist.
Recommended
Action
Verify that there is no duplicate port member in the portlist.
Severity INFO
SEC-1163
Message
Probable
Cause
Indicates that the lockdown option was attempted while the fabric is already in secure mode.
Recommended
Action
Do not use the lockdown option with the secModeEnable command when switch is already in secure
mode.
<timestamp>, [SEC-1159], <sequence-number>,, INFO, <system-name>,
Non_Reachable domain <Domain ID>.
<timestamp>, [SEC-1160], <sequence-number>,, INFO, <system-name>,
Duplicate port <port ID> in port list (<port list>).
<timestamp>, [SEC-1163], <sequence-number>,, ERROR, <system-name>,
System is already in secure mode. Lockdown option cannot be applied.