Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 59-1
Publication Number: 53-1000242-01
Chapter
59
SNMP System Messages
SNMP-1001
Message
Probable
Cause
Indicates that the SNMP service could not be started because of the specified Reason. You will not be
able to query the switch through SNMP.
Recommended
Action
Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the specified
Reason is an initialization failure, the switch requires a reboot.
Severity ERROR
SNMP-1002
Message
Probable
Cause
Indicates that the initialization of the SNMP service failed and you will not be able to query the switch
through SNMP.
Recommended
Action
Reboot or power cycle the switch. This will automatically initialize SNMP.
Severity ERROR
SNMP-1003
Message
Probable
Cause
Indicates that the changes in the SNMP community strings could not be propagated to other switches in
the secure fabric.
<timestamp>, [SNMP-1001], <sequence-number>,, ERROR, <system-name>,
SNMP service is not available <Reason>.
<timestamp>, [SNMP-1002], <sequence-number>,, ERROR, <system-name>,
SNMP <Error Details> initialization failed.
<timestamp>, [SNMP-1003], <sequence-number>,, ERROR, <system-name>,
Distribution of Community Strings to Secure Fabric failed.