Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

61-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
SULB-1008
61
Probable
Cause
Indicates that the standby CP is rebooting with new firmware.
Recommended
Action
No action is required. The firmwareDownload command is progressing as expected.
Run the firmwareDownloadStatus command for more information.
Severity INFO
SULB-1008
Message
Probable
Cause
Indicates that the standby CP has rebooted successfully.
Recommended
Action
No action is required. The firmwareDownload command is progressing as expected.
Run the firmwareDownloadStatus command for more information.
Severity INFO
SULB-1011
Message
Probable
Cause
Indicates that the firmwaredownload command failed. The additional state code indicates where in the
process it failed. Status code provides debugging information.
Recommended
Action
Run the firmwareDownloadStatus command for more information.
Refer to the Fabric OS Administrator’s Guide for troubleshooting information.
Severity INFO
SULB-1022
Message
<timestamp>, [SULB-1008], <sequence-number>,, INFO, <system-name>,
Standby CP booted successfully with new firmware.
<timestamp>, [SULB-1011], <sequence-number>,, INFO, <system-name>,
Firmwaredownload command failed. state: 0x<state code>, status:
0x<status code>.
<timestamp>, [SULB-1022], <sequence-number>,, WARNING, <system-
name>, The blade in slot <Slot number> has rebooted successfully
with new firmware.