Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 67-1

Publication Number: 53-1000242-01

Chapter

TS System Messages

TS-1001

Message

Probable

Cause

Indicates that a network time protocol (NTP) query to the configured external clock server failed. Local

clock time on the principal or primary FCS switch is used for fabric synchronization.

This might be logged during temporary operational issues such as IP network connection issues to the

external clock server. If it does not recur, it can be ignored.

Recommended

Action

Verify that the configured external clock server is available and functional. If that external clock server

is not available, choose another.

Severity WAR NIN G

TS-1002

Message

Probable

Cause

Indicates that the fabric time synchronization distributed from the principal or primary FCS switch was

not sourced from the Type of clock server configured, instead, an alternate server was used, indicated by

Type of clock server used. The type of clock server used or configured might be either:

• LOCL

Local clock on the principal or primary FCS switch

• External

External NTP server address configured

This might be logged during temporary operational issues such as IP network connection issues to the

external clock server or if the fabric is configured for external time synchronization but the principal or

primary FCS does not support the feature. If the message does not recur, it should be ignored.

<timestamp>, [TS-1001], <sequence-number>,, WARNING, <system-name>,

NTP Query failed: <error code>

<timestamp>, [TS-1002], <sequence-number>,, WARNING, <system-name>,

< Type of clock server used > Clock Server used instead of < Type of

clock server configured >: locl: 0x<code> remote: 0x<code>