Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 71-1
Publication Number: 53-1000242-01
Chapter
71
WEBD System Messages
WEBD-1001
Message
Probable
Cause
Indicates that the SSL certificate file is either invalid or absent.
Recommended
Action
Run the configure command to disable HTTPS. Install a valid key file and enable HTTPS again. For
more information on the configure command, refer to the Fabric OS Command Reference.
Severity WAR NIN G
WEBD-1002
Message
Probable
Cause
Indicates that the SSL key file is either invalid or absent.
Recommended
Action
Run the configure command to disable HTTPS. Install a valid key file and enable HTTPS again. For
more information on the configure command, refer to the Fabric OS Command Reference.
Severity WAR NIN G
WEBD-1003
Message
<timestamp>, [WEBD-1001], <sequence-number>,, WARNING, <system-
name>, Missing or Invalid Certificate file -- HTTPS is configured to
be enabled but could not be started.
<timestamp>, [WEBD-1002], <sequence-number>,, WARNING, <system-
name>, Missing or Invalid Key file -- HTTPS is configured to be
enabled but could not be started.
<timestamp>, [WEBD-1003], <sequence-number>,, INFO, <system-name>,
HTTP/HTTPS interface disabled