Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 73-1

Publication Number: 53-1000242-01

Chapter

ZONE System Messages

ZONE-1002

Message

Probable

Cause

Indicates that a zone filter or zone group check failure occurred. The frame filter logic reported a failure

when creating or adding zone groups during PLOGI trap processing. This messages usually indicates

problems when adding CAM entries before the filter setup.

Recommended

Action

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity WAR NIN G

ZONE-1003

Message

Probable

Cause

Indicates that the port zone member that is targeted for the local switch contains a non-existent port. The

effective zoning configuration (displayed in the error message) contains a port number that is out of

range.

Recommended

Action

Edit the zone database and change the port number to a viable value in the effective configuration.

Severity WAR NIN G

<timestamp>, [ZONE-1002], <sequence-number>,, WARNING, <system-

name>, WWN zoneTypeCheck or zoneGroupCheck warning(<warning

string>) at port(<port number>)

<timestamp>, [ZONE-1003], <sequence-number>,, WARNING, <system-

name>, zone(<current zone>) contains (<domain id>, <port number>)

which does not exist.