Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

73-10 Fabric OS Message Reference
Publication Number: 53-1000242-01
ZONE-1031
73
ZONE-1031
Message
Probable
Cause
The switch is set to interop mode using the interopMode command. Interop mode does not allow
<domain, portarea> members in the active zone database.
Recommended
Action
Remove all <domain, portarea> members from the zone database, or convert them to WWN zoning.
Severity ERROR
ZONE-1032
Message
Probable
Cause
Indicates that the specified domain does not have enough memory for the zone database being
committed.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity ERROR
ZONE-1033
Message
Probable
Cause
Indicates that the specified domain has the lowest memory available for the zone database in the fabric.
The zone database must be smaller than the memory available on this domain.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity ERROR
<timestamp>, [ZONE-1031], <sequence-number>,, ERROR, <system-name>,
Switch is in interop mode. (switch, port) members not supported.
<timestamp>, [ZONE-1032], <sequence-number>,, ERROR, <system-name>,
Domain <domain number> Max Zone DB size <max zone db size>
<timestamp>, [ZONE-1033], <sequence-number>,, ERROR, <system-name>,
Domain <domain number> Lowest Max Zone DB size