Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 73-11
Publication Number: 53-1000242-01
ZONE-1034
73
ZONE-1034
Message
Probable
Cause
Indicates that the zone database is corrupt or zone database is not found.
Recommended
Action
Use the firmwareDownload command to reinstall the firmware.
Severity WAR NIN G
ZONE-1035
Message
Probable
Cause
Indicates that the Fabric OS cannot rename the zone configuration file. Typically the zone configuration
is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity ERROR
ZONE-1036
Message
Probable
Cause
Indicates that the Fabric OS cannot create the zone configuration file. Typically the zone configuration
is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity ERROR
<timestamp>, [ZONE-1034], <sequence-number>,, WARNING, <system-
name>, Zoning file doesn't exist or Corrupted Zoning files detected
before reboot, currently the file is saved at <config file name>
<timestamp>, [ZONE-1035], <sequence-number>,, ERROR, <system-name>,
Unable to rename <Old config file name> to <New config file name>:
error message <System Error Message>
<timestamp>, [ZONE-1036], <sequence-number>,, ERROR, <system-name>,
Unable to create <config file name>: error message <System Error
Message>