Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 73-13
Publication Number: 53-1000242-01
ZONE-1040
73
ZONE-1040
Message
Probable
Cause
Indicates that the Fabric OS cannot read the merged zone configuration file. Typically the zone
configuration is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity INFO
ZONE-1041
Message
Probable
Cause
Indicates a possible unstable link or faulty cable.
Recommended
Action
Check the SFP and cable at the specified port and verify that they are not faulty. Replace the SFP and
cable as necessary.
Severity WAR NIN G
ZONE-1042
Message
Probable
Cause
Indicates that the effective zone configuration has been disabled.
Recommended
Action
Verify that this zone configuration change was done on purpose. If no effective zone configuration is
needed, no action is necessary.
Severity INFO
<timestamp>, [ZONE-1040], <sequence-number>,, INFO, <system-name>,
Merged zone database exceeds limit.
<timestamp>, [ZONE-1041], <sequence-number>,, WARNING, <system-
name>, Unstable link detected during merge at port (<Port number>).
<timestamp>, [ZONE-1042], <sequence-number>,, INFO, <system-name>,
The effective configuration has been disabled. <AD Id>