Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

1-4 Fabric OS Message Reference

Publication Number: 53-1000242-01

Viewing and Configuring System Message Logs

This section provides information on viewing and configuring system message logs, including:

• “Viewing System Messages from Web Tools” on page 1-6

• “Dumping System Messages” on page 1-6

• “Viewing the System Messages with Page Breaks” on page 1-7

• “Clearing the System Message Log” on page 1-7

Table 1-1 describes commands that you can use to view or configure the system message logs. Most

commands require admin access level. For detailed information on required access levels and

commands, refer to the Fabric OS Command Reference.

Table 1-1 Commands Used to View or Configure the System Logs

Command Description

agtCfgDefault Resets the SNMP recipients to default values.

agtCfgSet Modifies the SNMP agent configuration.

agtCfgShow Displays the current SNMP agent configuration.

auditCfg Configures the audit message log.

auditShow Modifies and displays audit log filter configuration.

errClear Clears all error log messages for all switch instances on this control processor

(CP).

errDelimterSet Sets the error log start and end delimiter for messages pushed to the console.

errDump Displays the entire error log, without page breaks. Use the -r option to show

the messages in reverse order, from newest to oldest.

errFilterSet Sets an error severity filter for the system console.

errShow Displays the entire error log, with page breaks. Use the -r option to show the

messages in reverse order, from newest to oldest.

pdShow Displays the contents of the panic dump and core dump files.

portErrShow Displays the port error summary.

portLogClear Clears the port log. If the port log is disabled, this commands enables it.

portLogDisable Disables the port log facility.

portLogDump Displays the port log, without page breaks.

portLogDumpPort Displays the port log of the specified port, without page breaks.

portLogEventShow Displays which port log events are currently being reported.

portLoginShow Displays port logins.

portLogPdisc Sets or clear the debug pdisc_flag.

portLogReset Enables the port log facility.

portLogResize Resizes the port log to the specified number of entries.

portLogShow Displays the port log, with page breaks.