Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

3-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
BL-1003
3
Probable
Cause
Indicates that the blade initiation failed because one or more of the internal ports was not online. The
blade is faulted.
Recommended
Action
Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the
blade.
Run the systemVerification command to verify that the blade does not have hardware problems. Refer
to the Fabric OS Command Reference for more information on this command.
Additional blade fault messages precede and follow this error, providing more information. See other
error messages for recommended action.
If the message persists, replace the blade.
Severity CRITICAL
BL-1003
Message
Probable
Cause
Indicates a faulty blade in the specified slot number.
Recommended
Action
Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the
blade.
Run the systemVerification command to verify that blade does not have hardware problems. Refer to
the Fabric OS Command Reference for more information on this command.
If the message persists, replace the blade.
Severity CRITICAL
BL-1004
Message
Probable
Cause
Indicates that the specified blade experienced a failure but was not faulted due to a user setting.
Recommended
Action
Reboot or power cycle the blade, using the slotPowerOff and slotPowerOn commands.
Run the systemVerification command to verify that the blade does not have hardware problems. Refer
to the Fabric OS Command Reference for more information on this command.
If the message persists, replace the blade.
Severity CRITICAL
<timestamp>, [BL-1003], <sequence-number>, FFDC, CRITICAL, <system-
name>, Faulting blade in slot <slot number>
<timestamp>, [BL-1004], <sequence-number>, FFDC, CRITICAL, <system-
name>, Suppressing blade fault in slot <slot number>