Brocade Fabric OS MIB Reference (53-1000241-01, November 2006)

8-10 Fabric OS MIB Reference

Publication Number: 53-1000241-01

connUnitType 1.3.6.1.3.94.1.6.1.3

The Brocade implementation maps the switch WWN to the top 8 octets of this variable and sets the

remaining lower 8 octets to 0.

Example:

If Brocade’s switch WWN is 10:0:0:60:69:10:02:18, then use the SNMP GET command on

connUnitGlobalId.10.0.0.60.69.10.02.18.0.0.0.0.0.0.0.0 returns:

10 00 00 60 69 10 02 18 00 00 00 00 00 00 00 00

connUnitType 1.3.6.1.3.94.1.6.1.3

The type of this connectivity unit.

Set to 4 (switch).

connUnitNumports 1.3.6.1.3.94.1.6.1.4

Number of physical ports (between 0 and the maximum number of system supported ports) in the

connectivity unit (internal/embedded, external).

To determine the maximum number of system supported ports, use the SNMP GET command on

swFcPortCapacity.

The SilkWorm switches support 0 to maximum number of system supported ports.

The maximum number of supported ports are as follows:

SilkWorm 3200, 3250 8 ports

SilkWorm 4012 12 ports

SilkWorm 200E, 3800, 3850 16 ports

SilkWorm 3900, 4100 32 ports

SilkWorm 4900 64 ports

SilkWorm 7500 32 ports

SilkWorm 12000 128 ports

SilkWorm 24000 128 ports

SilkWorm 48000 256 ports

connUnitState 1.3.6.1.3.94.1.6.1.5

Overall state of the connectivity unit.

Values Possible values are:

• unknown (1)

• online (2) Set the state to online.

• offline (3) Set the state to offline.

Mapped as follows:

switchState(ONLINE) 2 (online)