Brocade Fabric OS MIB Reference (53-1000241-01, November 2006)

Fabric OS MIB Reference 8-33
Publication Number: 53-1000241-01
connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13
8
Brocade does not support Hubs.
connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13
This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a Big
Endian value of 24 bits. If this is loop, then it is the AL_PA that is connected. If this is an E_port, then it
contains only the domain ID. If not any of those, unknown or cascaded loop, return all bits set to 1.
ISL: Port ID of the remote port.
Device: Port ID of the remote port.
connUnitLinkCurrIndex 1.3.6.1.3.94.1.12.1.14
Not supported in Fabric OS v2.6.1.
The last-used link index.
Statistics Group
Not supported in Fabric OS v2.6.1.
Port types are aggregated into a port type class, such as all the fabric port types.
Each individual port has only one statistics table. For all objects in the statistics table, if the object is not
supported by the conn unit, then the high order bit is set to 1, with all other bits set to 0 (for example, the
last eight bytes of the returned value might be ...:80 00 00 00 00 00 00 00).
The high order bit is reserved to indicate whether the object is supported. All objects start at a value of 0
at hardware initialization and continue incrementing until end of 63 bits and then wrap to 0.
This is the case for all Class 1 Frames; Brocade does not support them.
connUnitPortStatTable 1.3.6.1.3.94.4.5
A list of statistics for the fabric port types.
Table 8-2 connUnitLinkUnitTypeY End Devices
Storage System Storage Sub-system Unknown Other
Direct Access
Sequential Access
Write-Once
CD-ROM
Optical
Medium Changer
Array
SES
Unknown Anything else
(printer device,
processor device,
scanner, and so on)