53-1000602-01 October 19, 2007 Fabric OS MIB Reference Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x, v5.0.x, v5.1.x, v5.2.x, v5.3.x, v6.0.
Copyright © 2007, Brocade Communications Systems, Incorporated. ALL RIGHTS RESERVED. Brocade, the Brocade B weave logo, Fabric OS, File Lifecycle Manager, MyView, Secure Fabric OS, SilkWorm, and StorageX are registered trademarks and Tapestry is a trademark of Brocade Communications Systems, Inc., in the United States and/or in other countries. FICON is a registered trademarks of IBM Corporation in the U.S. and other countries.
Document History The following table lists all versions of the MIB Reference. Document Title Publication Number Summary of Changes Publication Date Brocade MIB Reference Manual v2.3 53-0000069-02 December 2000 Brocade MIB Reference Manual v3.0 53-0000134-03 July 2001 Brocade MIB Reference Manual v3.0, 4.0 53-0000184-02 March 2002 Brocade MIB Reference Manual (v4.1, v4.0.x, v3.1, v3.0.x, v2.6.x) 53-0000521-02 Added Brocadespecific Entity and HA-MIBs.
Contents About This Document How This Document Is Organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Supported Hardware and Software . . . . . . . . . . . . . . . . . . . . . . . . . . xii What’s New in This Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 ICMP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 TCP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 UDP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 EGP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 5 SW-MIB Objects SW MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 SW-MIB System Organization of MIB Objects . . . . . . . . . . . . .119 Textual Conventions for SW-MIB . . . . . . . . . . . . . . . . . . . . . . . .128 sw Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130 swSystem Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 Flash Administration . . . . . .
Chapter 8 FibreAlliance MIB Objects FibreAlliance MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199 FCMGMT-MIB System Organization of MIB Objects . . . . . . . .200 Definitions for FCMGMT-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . .205 ConnSet Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 Statistics Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233 Service Group . . . . . . . . . .
Appendix B MIB OIDs and Their Matching Object Names MIB OIDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
x Fabris OS MIB Reference 53-1000602-01
About This Document This reference document is for SNMP administrators who need to configure and administer the SNMP interface to manage a fabric. “About This Document” contains the following sections: • • • • • • • How This Document Is Organized . . . . . . . . . . . . . . . . xi Supported Hardware and Software . . . . . . . . . . . . . . . xii What’s New in This Document . . . . . . . . . . . . . . . . . . xiii Document Conventions . . . . . . . . . . . . . . . . . . . . . . .
Supported Hardware and Software This document supports Brocade Fabric OS versions v6.0.0 and earlier versions, v5.3.x, v 5.2.x, v5.1.x, v5.0.x, v4.4.0, v4.2.x, v4.1.x, v3.2.x, v3.1.
What’s New in This Document The following changes have been made since this document was last released: • Information that was changed: - Information on ISCSI MIB has been added. - Miscellaneous additions and corrections have been made throughout. Document Conventions This section describes text formatting conventions and important notices formats.
SPECIAL TERM USES For definitions of SAN-specific terms, visit the Storage Networking Industry Association online dictionary at http://www.snia.org/education/dictionary. Additional Information This section lists additional Brocade and industry-specific documentation that you might find helpful. BROCADE RESOURCES The following related documentation is provided on the Brocade Documentation CD-ROM and on the Brocade Web site, through Brocade Connect. NOTE Go to http://www.brocade.
Extended Fabrics Supports the reliable, high-speed connectivity of Brocade switches over dark fiber or Dense Wave Division Multiplexing (DWDM) equipment at distances up to 500 km to enhance business continuance operations. Fabric Watch Continuously monitors SAN fabrics for potential faults based on thresholds set for a variety of SAN fabric elements and events—automatically alerting administrators to potential problems before they become costly failures.
• Best practice guides, including the SAN Security Best Practice Guide, white papers, online demos, data sheets, and other documentation is available through the Brocade Partner Web site. • The CERT® Coordination Center of Carnegie Mellon University provides industry-level information about certification at: http://www.cert.org For additional resource information, visit the Technical Committee T11 Web site.
- Brocade 4100, 4900, and 7500—On the switch ID pull-out tab located inside the chassis on the port side on the left - Brocade 5000—On the switch ID pull-out tab located on the bottom of the port side of the switch - Brocade 7600—On the bottom of the chassis Brocade 48000 and Brocade DCX—Inside the chassis next to the power supply bays. 3. World Wide Name (WWN) - Use the wwn command to display the switch WWN.
xviii Fabric OS MIB Reference 53-1000602-01
Chapter 1 Understanding Brocade SNMP The Simple Network Management Protocol (SNMP) is an industry-standard method of monitoring and managing network devices. This protocol promotes interoperability, because SNMP-capable systems must adhere to a common set of framework and language rules. Understanding the components of SNMP makes it possible to use third-party tools to view, browse, and manipulate Brocade switch variables (MIBs) remotely as well as to set up an enterprise-level management process.
1 Understanding SNMP Basics TABLE 1 Security Level Options (Continued) security level Protocol Query Behavior Traps Authentication and Privacy [2] (authPriv) SNMPv1 SNMPv3 Not allowed. Only SNMPv3 users with authPriv privilege are allowed. Not Sent. Sent only for authPriv users. No Access [3] SNMPv1 SNMPv3 Not allowed. Not Sent. Understanding SNMP Basics Every Brocade switch carries an agent and management information base (MIB), as shown in Figure 1.
Understanding SNMP Basics 1 UNDERSTANDING MIBS The management information base (MIB) is a database of monitored and managed information on a device, in this case a Brocade switch. The MIB structure can be represented by a tree hierarchy. The root splits into three main branches: International Organization for Standardization (ISO), Consultative Committee for International Telegraph and Telephone (CCITT), and joint ISO/CCITT. These branches have short text strings and integers (OIDs) to identify them.
1 Understanding SNMP Basics Brocade supports FE_RCF2837.mib under the MIB-II branch in Fabric OS v6.0.0, v4.x, v3.2.0, and v3.1.x and the experimental version, FE_EXP.mib, in Fabric OS v2.6.x and 3.0.x. This latest version of the FE MIB references the FRAMEWORK.MIB and, based on the MIB browser, it is necessary to load this MIB before the FE.MIB. See “Loading Brocade MIBs” on page 6 for more information. Once loaded, the MAX-ACCESS provides access levels between the agent and management station.
Understanding SNMP Basics 1 • connUnitPortStatusChange The MIB-II system description swEventTrapLevel determines the output for the connUnitEventTrap. Events in the Error Log of a severity at or above the configured threshold will generate SNMP traps. The Fibre Alliance Trap (FA-TRAP) can be configured to send traps using the snmpConfig command. See the Fabric OS Command Reference for more information on this command.
1 Loading Brocade MIBs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11.5 where: 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 is the OID (of swFCPortTxWords) and 5 is the instance ID for port 4. You must add 1 to the port number to get its instance number in SNMP because SNMP numbering starts at 1; switch port numbering starts at 0. Loading Brocade MIBs The Brocade MIB is a set of variables that are private extensions to the Internet standard MIB-II. The Brocade agents support many other Internet-standard MIBs.
Loading Brocade MIBs 1 2. Fabric OS v4.4.0 and v5.x support SNMPv3-USM MIB (snmpUsmMIB), which is available as RFC 3414. 3. SNMPv2 is supported from FOS v5.0.4 and higher, but SNMP v2 traps are not supported. MIB LOADING ORDER Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS section near the top of the MIB. When loading the Brocade MIBs, see Figure 5 to ensure any MIB dependencies are loading in the correct order.
1 Loading Brocade MIBs NOTE FA_v3_0.mib obsoletes the use of the connUnitPortStatFabricTable used in the FA_v2_2.mib. FA_v3_0.mib now uses the connUnitPortStatTable for port statistics. The FA_v3_0.mib and the FA_v2_2.mib cannot be loaded concurrently on the same SNMP management system. The FE_RFC2837.mib and the FE_EXP.mib can be loaded concurrently on the same SNMP management system. The FE_EXP.mib was listed in the experimental OID section. The FE_RFC2837.
Brocade 7500 / FR4-18i and Brocade MIBs 1 Brocade 7500 / FR4-18i and Brocade MIBs Beginning with release Fabric OS 5.3.0, statistics are available for FCIP tunnels, VEX_Ports, or VE_Ports through the portstatshow command. The changes in the sensor details for FR4-18i Blade has been incorporated into SNMP. The “connUnitSensorTable 1.3.6.1.3.94.1.8” on page 216 and “swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22” on page 142 display information consistent with the Fabric OS sensorShow command.
1 Fabric OS Commands for Configuring SNMP Fabric OS Commands for Configuring SNMP Use the following commands to configure MIBs in the Fabric OS. See the Fabric OS Administrator’s Guide for procedures for configuring SNMP on the Brocade switches. TABLE 4 Commands for Configuring SNMP Command Description snmpConfig This command has all the features of the existing the agtcfg* commands; in addition, it has SNMPv3 configuration parameters. snmpMibCapSet Enhanced in Fabric OS v4.
Chapter MIB-II (RFC1213-MIB) 2 This chapter provides descriptions and other information specific to MIB-II, and includes the following sections: • • • • • • • • • • • • MIB II Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 System Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Interfaces Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 AT Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 IP Group. . . . . . .
2 MIB-II Object Hierarchy - snmp - iFMIB FIGURE 6 MIB-II Overall Hierarchy - system (1.3.6.1.2.1.1) - sysDescr 1.3.6.1.2.1.1.1 - sysObjectID 1.3.6.1.2.1.1.2 - sysUpTime 1.3.6.1.2.1.1.3 - sysContact 1.3.6.1.2.1.1.4 - sysName 1.3.6.1.2.1.1.5 - sysLocation 1.3.6.1.2.1.1.6 - sysServices 1.3.6.1.2.1.1.
MIB-II Object Hierarchy 2 - interfaces (1.3.6.1.2.1.2) - ifNumber 1.3.6.1.2.1.2.1 - ifTable 1.3.6.1.2.1.2.2 - ifEntry 1.3.6.1.2.1.2.2.1 - ifIndex 1.3.6.1.2.1.2.2.1.1 - ifDescr 1.3.6.1.2.1.2.2.1.2 - ifType 1.3.6.1.2.1.2.2.1.3 - ifMtu 1.3.6.1.2.1.2.2.1.4 - ifSpeed 1.3.6.1.2.1.2.2.1.5 - ifPhysAddress 1.3.6.1.2.1.2.2.1.6 - ifAdminStatus 1.3.6.1.2.1.2.2.1.7 - ifOperStatus 1.3.6.1.2.1.2.2.1.8 - ifLastChange 1.3.6.1.2.1.2.2.1.9 - ifInOctets 1.3.6.1.2.1.2.2.1.10 - ifInUcastPkts 1.3.6.1.2.1.2.2.1.
2 MIB-II Object Hierarchy - ip (1.3.6.1.2.1.4) - ipForwarding 1.3.6.1.2.1.4.1 - ipDefaultTTL 1.3.6.1.2.1.4.2 - ipInReceives 1.3.6.1.2.1.4.3 - ipInHdrErrors 1.3.6.1.2.1.4.4 - ipInAddrErrors 1.3.6.1.2.1.4.5 - ipForwDatagrams 1.3.6.1.2.1.4.6 - ipInUnknownProtos 1.3.6.1.2.1.4.7 - ipInDiscards 1.3.6.1.2.1.4.8 - ipInDelivers 1.3.6.1.2.1.4.9 - ipOutRequests 1.3.6.1.2.1.4.10 - ipOutDiscards 1.3.6.1.2.1.4.11 - ipOutNoRoutes 1.3.6.1.2.1.4.12 - ipReasmTimeout 1.3.6.1.2.1.4.13 - ipReasmReqds 1.3.6.1.2.1.4.
MIB-II Object Hierarchy 2 - icmp (1.3.6.1.2.1.5) - icmpInMsgs 1.3.6.1.2.1.5.1 - icmpInErrors 1.3.6.1.2.1.5.2 - icmpInDestUnreachs 1.3.6.1.2.1.5.3 - icmpInTimeExcds 1.3.6.1.2.1.5.4 - icmpInParmProbs 1.3.6.1.2.1.5.5 - icmpInSrcQuenchs 1.3.6.1.2.1.5.6 - icmpInRedirects 1.3.6.1.2.1.5.7 - icmpInEchos 1.3.6.1.2.1.5.8 - icmpInEchoReps 1.3.6.1.2.1.5.9 - icmpInTimestamps 1.3.6.1.2.1.5.10 - icmpInTimestampReps 1.3.6.1.2.1.5.11 - icmpInAddrMasks 1.3.6.1.2.1.5.12 - icmpInAddrMaskReps 1.3.6.1.2.1.5.13 - icmpOutMsgs 1.
2 MIB-II Object Hierarchy - tcp - (1.3.6.1.2.1.6) tcpRtoAlgorithm 1.3.6.1.2.1.6.1 tcpRtoMin 1.3.6.1.2.1.6.2 tcpRtoMax 1.3.6.1.2.1.6.3 tcpMaxConn 1.3.6.1.2.1.6.4 tcpActiveOpens 1.3.6.1.2.1.6.5 tcpPassiveOpens 1.3.6.1.2.1.6.6 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpEstabResets 1.3.6.1.2.1.6.8 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpInSegs 1.3.6.1.2.1.6.10 tcpOutSegs 1.3.6.1.2.1.6.11 tcpRetransSegs 1.3.6.1.2.1.6.12 tcpConnTable 1.3.6.1.2.1.6.13 - tcpConnEntry 1.3.6.1.2.1.6.13.1 - tcpConnState 1.3.6.1.2.1.6.13.1.
MIB-II Object Hierarchy 2 - egp - (1.3.6.1.2.1.8) Transmission Group egpInErrors egpOutMsgs egpOutErrors egpNeighTable - egpNeighEntry - egpNeighState - egpNeighAddr - egpNeighAs - egpNeighInMsgs - egpNeighInErrs - egpNeighOutMsgs - egpNeighOutErrs - egpNeighInErrMsgs - egpNeighOutErrMsgs - egpNeighStateUps - egpNeighStateDowns - egpNeighIntervalHello - egpNeighIntervalPoll - egpNeighMode - egpNeighEventTrigger - egpAs FIGURE 14 egp Hierarchy - snmp (1.3.6.1.2.1.11) - snmpInPkts 1.3.6.1.2.1.11.
2 Textual Conventions - ifMIB (1.3.6.1.2.1.31) - FIGURE 16 ifMIB Hierarchy Textual Conventions Table 5 lists the textual conventions used for MIB-II. TABLE 5 MIB-II Textual Conventions Type Definition Value DisplayString Octet String of size 0 to 255 PhysAddress Octet String Objects and Types Imported The following objects and types are imported from RFC1155-SMI: • • • • • • mgmt NetworkAddress IpAddress Counter Gauge TimeTicks System Group All systems must implement the System Group.
sysObjectID 1.3.6.1.2.1.1.2 2 sysObjectID 1.3.6.1.2.1.1.2 The vendor’s authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining what kind of device is being managed. Example Default If a vendor “NetYarn, Inc.” was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its “Knit Router”. The device type.
2 sysServices 1.3.6.1.2.1.1.7 sysServices 1.3.6.1.2.1.1.7 A value that indicates the set of services that this entity primarily offers.The value is a sum. This sum initially takes the value 0. Then, for each layer, L, in the range 1 through 7, for which this node performs transactions, 2 raised to (L - 1) is added to the sum. For example, a node that primarily performs routing functions has a value of 4 (23-1).
ifIndex 1.3.6.1.2.1.2.2.1.1 2 ifIndex 1.3.6.1.2.1.2.2.1.1 A unique value for each interface. The values range between 1 and the value of ifNumber. The value for each interface must remain constant, at least from one reinitialization of the entity's network management system to the next reinitialization. The number of entries inside the Brocade 12000, 24000, and 48000 directors is 1 to 3 for FCIP; otherwise, the value is 1 or 2. ifDescr 1.3.6.1.2.1.2.2.1.
2 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 The interface's address at the protocol layer immediately below the network layer in the protocol stack. Values For interfaces that do not have such an address (for example, a serial line), this object should contain an octet string of zero length. • eth0 returns the MAC address of the Ethernet • lo returns null • fc0 returns the MAC address of the Fibre Channel ifAdminStatus 1.3.6.1.2.1.2.2.1.7 The desired state of the interface.
ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12 2 ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12 The number of nonunicast packets (for example, subnetwork-broadcast or subnetwork-multicast) delivered to a higher-layer protocol. Not supported. ifInDiscards 1.3.6.1.2.1.2.2.1.13 The number of inbound packets that were chosen to be discarded (even though no errors had been detected) to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free buffer space.
2 ifOutDiscards 1.3.6.1.2.1.2.2.1.19 ifOutDiscards 1.3.6.1.2.1.2.2.1.19 The number of outbound packets that were chosen to be discarded (even though no errors had been detected) to prevent their being transmitted. One possible reason for discarding such a packet could be to free buffer space. ifOutErrors 1.3.6.1.2.1.2.2.1.20 The number of outbound packets that could not be transmitted because of errors. ifOutQLen 1.3.6.1.2.1.2.2.1.21 The length of the output packet queue (in packets). Not supported.
atEntry 1.3.6.1.2.1.3.1.1 2 The Address Translation tables contain the network address to physical address equivalences. Some interfaces do not use translation tables for determining address equivalences (for example, DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty. atEntry 1.3.6.1.2.1.3.1.1 Each entry contains one network address to physical address equivalence. Index atIfIndex, atNetAddress atIfIndex 1.3.6.1.2.1.3.1.1.
2 ipInHdrErrors 1.3.6.1.2.1.4.4 ipInHdrErrors 1.3.6.1.2.1.4.4 The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, and so on. ipInAddrErrors 1.3.6.1.2.1.4.5 The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity.
ipOutDiscards 1.3.6.1.2.1.4.11 2 ipOutDiscards 1.3.6.1.2.1.4.11 The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (for example, for lack of buffer space). NOTE This counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion. ipOutNoRoutes 1.3.6.1.2.1.4.
2 ipFragFails 1.3.6.1.2.1.4.18 ipFragFails 1.3.6.1.2.1.4.18 The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be (for example, because their Don't Fragment flag was set). ipFragCreates 1.3.6.1.2.1.4.19 The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. ipAddrTable 1.3.6.1.2.1.4.20 The table of addressing information relevant to this entity's IP addresses. ipAddrEntry 1.3.6.1.2.1.4.
ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5 2 ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5 The size of the largest IP datagram that this entity can reassemble from incoming IP fragmented datagrams received on this interface. ipRouteTable 1.3.6.1.2.1.4.21 The IP routing table contains an entry for each route currently known to this entity. ipRouteEntry 1.3.6.1.2.1.4.21.1 A route to a particular destination. Index ipRouteDest ipRouteDest 1.3.6.1.2.1.4.21.1.1 The destination IP address of this route.
2 ipRouteMetric3 1.3.6.1.2.1.4.21.1.5 ipRouteMetric3 1.3.6.1.2.1.4.21.1.5 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. ipRouteMetric4 1.3.6.1.2.1.4.21.1.6 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value.
ipRouteMask 1.3.6.1.2.1.4.21.1.11 2 Older semantics cannot be implied except through knowledge of the routing protocol by which the route was learned. ipRouteMask 1.3.6.1.2.1.4.21.1.11 The mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field.
2 ipNetToMediaEntry 1.3.6.1.2.1.4.22.1 ipNetToMediaEntry 1.3.6.1.2.1.4.22.1 Each entry contains one IP address to physical address equivalence. Index ipNetToMediaIfIndex, ipNetToMediaNetAddress ipNetToMediaIfIndex 1.3.6.1.2.1.4.22.1.1 The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex. ipNetToMediaPhysAddress 1.3.6.1.2.1.4.22.1.2 The media-dependent physical address.
icmpInDestUnreachs 1.3.6.1.2.1.5.3 2 icmpInDestUnreachs 1.3.6.1.2.1.5.3 The number of ICMP Destination Unreachable messages received. icmpInTimeExcds 1.3.6.1.2.1.5.4 The number of ICMP Time Exceeded messages received. icmpInParmProbs 1.3.6.1.2.1.5.5 The number of ICMP Parameter Problem messages received. icmpInSrcQuenchs 1.3.6.1.2.1.5.6 The number of ICMP Source Quench messages received. icmpInRedirects 1.3.6.1.2.1.5.7 The number of ICMP Redirect messages received. icmpInEchos 1.3.6.1.2.1.5.
2 icmpOutMsgs 1.3.6.1.2.1.5.14 icmpOutMsgs 1.3.6.1.2.1.5.14 The total number of ICMP messages that this entity attempted to send. NOTE This counter includes all those counted by icmpOutErrors. icmpOutErrors 1.3.6.1.2.1.5.15 The number of ICMP messages that this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram.
icmpOutTimestamps 1.3.6.1.2.1.5.23 2 icmpOutTimestamps 1.3.6.1.2.1.5.23 The number of ICMP Timestamp (request) messages sent. icmpOutTimestampReps 1.3.6.1.2.1.5.24 The number of ICMP Timestamp Reply messages sent. icmpOutAddrMasks 1.3.6.1.2.1.5.25 The number of ICMP Address Mask Request messages sent. icmpOutAddrMaskReps 1.3.6.1.2.1.5.26 The number of ICMP Address Mask Reply messages sent.
2 TCP Group TCP Group Implementation of the TCP group is mandatory for all systems that implement the TCP. Instances of object types that represent information about a particular TCP connection are transient; they persist only as long as the connection in question. tcpRtoAlgorithm 1.3.6.1.2.1.6.1 The algorithm used to determine the time-out value used for retransmitting unacknowledged octets. tcpRtoMin 1.3.6.1.2.1.6.
tcpAttemptFails 1.3.6.1.2.1.6.7 2 tcpAttemptFails 1.3.6.1.2.1.6.7 The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state. tcpEstabResets 1.3.6.1.2.1.6.8 The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
2 tcpConnState 1.3.6.1.2.1.6.13.1.1 tcpConnState 1.3.6.1.2.1.6.13.1.1 The state of this TCP connection. The only value that might be set by a management station is deleteTCB (12). Accordingly, it is appropriate for an agent to return a badValue response if a management station attempts to set this object to any other value.
tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 2 tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 The remote port number for this TCP connection. tcpInErrs 1.3.6.1.2.1.6.14 The total number of segments received in error (for example, bad TCP checksums). tcpOutRsts 1.3.6.1.2.1.6.15 The number of TCP segments sent containing the RST flag. UDP Group Implementation of the UDP group is mandatory for all systems that implement the UDP. udpInDatagrams 1.3.6.1.2.1.7.1 The total number of UDP datagrams delivered to UDP users.
2 udpEntry 1.3.6.1.2.1.7.5.1 udpEntry 1.3.6.1.2.1.7.5.1 Information about a particular current UDP listener. Index udpLocalAddress, udpLocalPort udpLocalAddress 1.3.6.1.2.1.7.5.1.1 The local IP address for this UDP listener. In the case of a UDP listener that is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used. udpLocalPort 1.3.6.1.2.1.7.5.1.2 The local port number for this UDP listener. EGP Group Brocade does not support the EGP Group.
snmpInBadVersions 1.3.6.1.2.1.11.3 2 snmpInBadVersions 1.3.6.1.2.1.11.3 The total number of SNMP messages that were delivered to the SNMP protocol entity and were for an unsupported SNMP version. snmpInBadCommunityNames 1.3.6.1.2.1.11.4 The total number of SNMP messages delivered to the SNMP protocol entity that used a SNMP community name not known to said entity. snmpInBadCommunityUses 1.3.6.1.2.1.11.
2 snmpInReadOnlys 1.3.6.1.2.1.11.11 snmpInReadOnlys 1.3.6.1.2.1.11.11 The total number valid SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “readOnly.” It is a protocol error to generate an SNMP PDU that contains the value “readOnly” in the error-status field; as such, this object is provided as a means of detecting incorrect implementations of the SNMP. snmpInGenErrs 1.3.6.1.2.1.11.
snmpInTraps 1.3.6.1.2.1.11.19 2 snmpInTraps 1.3.6.1.2.1.11.19 The total number of SNMP Trap PDUs that have been accepted and processed by the SNMP protocol entity. snmpOutTooBigs 1.3.6.1.2.1.11.20 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is too large. snmpOutNoSuchNames 1.3.6.1.2.1.11.
2 snmpOutGetResponses 1.3.6.1.2.1.11.28 snmpOutGetResponses 1.3.6.1.2.1.11.28 The total number of SNMP Get-Response PDUs that have been generated by the SNMP protocol entity. snmpOutTraps 1.3.6.1.2.1.11.29 The total number of SNMP Trap PDUs that have been generated by the SNMP protocol entity. snmpEnableAuthenTraps 1.3.6.1.2.1.11.30 Indicates whether the SNMP agent process is permitted to generate authentication-failure traps.
ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 2 for an agent which responds to SNMP queries concerning an interface on some other (proxied) device, then the value of ifName for such an interface is the proxied devices local name for it. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string. ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.
2 ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.
ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 2 ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts.
2 ifAlias 1.3.6.1.2.1.31.1.1.1.18 ifAlias 1.3.6.1.2.1.31.1.1.1.18 This object is an alias name for the interface as specified by a network manager, and provides a non-volatile handle for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string.
Chapter 3 FE MIB Objects This chapter provides descriptions and other information specific to FE MIB object types and includes the following information: • FE MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 • FIBRE-CHANNEL-FE-MIB (MIB-II branch) . . . . . . . . . . 49 • FCFABRIC-ELEMENT-MIB (Experimental Branch) . . . 73 FE MIB Overview Brocade supports two versions of the FE MIB: • FIBRE-CHANNEL-FE-MIB (RFC2837) in the MIB-II branch.
3 FIBRE-CHANNEL-FE-MIB Organization The descriptions of each of the MIB variables in this chapter come directly from the FIBRE-CHANNEL-FE-MIB itself. The notes that follows the descriptions typically pertain to Brocade-specific information and are provided by Brocade. NOTE Brocade does not support the settable “Write” function for any of the Fibre Channel FE MIB objects except fcFxPortPhyAdminStatus.
FIBRE-CHANNEL-FE-MIB Organization - Fabric OS MIB Reference 53-1000602-01 3 fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4 fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5 fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8 fcFxPortCosSupported 1.3.6.1.2.1.75.1.1.5.1.9 fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 fcFxPortStackedConnMode 1.3.6.1.2.1.75.1.1.5.1.
3 FIBRE-CHANNEL-FE-MIB Organization FIGURE 18 fcFeConfig Hierarchy - fcFeStatus - fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 - fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 - fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 - fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 - fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 - fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 - fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 - fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 - fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.
FIBRE-CHANNEL-FE-MIB Organization 3 - fcFeAccounting - fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 - fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 - fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 - fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 - fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 - fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 - fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 - fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 - fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 - fcFxPortC1InConnections 1.
3 Definitions for FIBRE-CHANNEL-FE-MIB Definitions for FIBRE-CHANNEL-FE-MIB Table 7 lists the definitions for fcFeMIB. TABLE 7 FIBRE-CHANNEL-FE-MIB Definitions Type Definition Value Description Display string Octet string of size 0 to 255 Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. Milliseconds Integer from 0 to 2147383647 Represents time unit value in milliseconds.
Definitions for FIBRE-CHANNEL-FE-MIB TABLE 7 3 FIBRE-CHANNEL-FE-MIB Definitions (Continued) Type Definition Value Description Fc0BaudRate Integer according to FC-0 baud rates 1 (other) None of below 2 (one-eighth) 155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.
3 fcFeConfig Group TABLE 7 FIBRE-CHANNEL-FE-MIB Definitions (Continued) Type Definition Value Description FcFeFxPortCapacity Integer from 1 to 256 Maximum number of Fx_Ports within a module. For the Brocade 3250, this value is 8. For the Brocade 4012, this value is 12. For the Brocade 200E and 3850, this value is 16. For the Brocade 3900 and 4100, this value is 32. For the Brocade 4900, this value is 64. For the Brocade 5000, this value is 32 For the Brocade 12000, this value is 128.
fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 Value 3 The valid value for all Brocade switches is 1. fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 A table that contains information about the modules, one entry for each module in the fabric element. fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 An entry containing the configuration parameters of a module. Index 1: fcFeModuleIndex fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 Identifies the module within the fabric element for which this entry contains information.
3 fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 Contains the value of sysUpTime when the module entered its current operational status. A value of 0 indicates that the operational status of the module has not changed since the agent last restarted. fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6 The number of Fx_Ports that can be contained within the module.
fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 3 fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 The World Wide Name of this Fx_Port. Each Fx_Port has a unique port World Wide Name within the fabric. Return Displays the WWN of the port. fcFxPortFcphVersionHigh 1.
3 fcFxPortCosSupported 1.3.6.1.2.1.75.1.1.5.1.9 fcFxPortCosSupported 1.3.6.1.2.1.75.1.1.5.1.9 A value indicating the set of Classes of Service supported by the Fx_Port. fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection. 1 - true 2- false fcFxPortStackedConnMode 1.3.6.1.2.1.75.1.1.5.1.11 A value indicating the mode of Stacked Connect supported by the Fx_Port.
fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 3 fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 A table that contains operational status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 An entry containing operational status and parameters of an Fx_Port. Augments 1: fcFxPortEntry fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 The address identifier by which this Fx_Port is identified within the fabric.
3 fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 An entry containing physical level status and parameters of an Fx_Port. fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 The desired state of the Fx_Port. A management station might place the Fx_Port in a desired state by setting this object accordingly. Values Possible values are: 1: online(1) 2: offline(2) 3: testing(3) The testing state (3) indicates that no operational frames can be passed.
fcFxPortPhysRttov 1.3.6.1.2.1.75.1.2.2.1.4 3 fcFxPortPhysRttov 1.3.6.1.2.1.75.1.2.2.1.4 The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic to detect loss of synchronization. This value is displayed in milliseconds. NOTE This object is read-only. It is listed incorrectly in the MIB definition as read-write.
3 fcFxPortNxPortRxDataFieldSize 1.3.6.1.2.1.75.1.2.3.1.4 fcFxPortNxPortRxDataFieldSize 1.3.6.1.2.1.75.1.2.3.1.4 The Receive Data Field Size of the attached Nx_Port. This is a binary value that specifies the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port. The value is a number of bytes in the range 128 to 2112, inclusive. fcFxPortCosSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.
fcFxPortConnectedNxPort 1.3.6.1.2.1.75.1.2.3.1.11 3 fcFxPortConnectedNxPort 1.3.6.1.2.1.75.1.2.3.1.11 The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is ‘000000’H, this Fx_Port is not engaged in a connection. fcFxPortBbCreditModel 1.3.6.1.2.1.75.1.2.3.1.12 Identifies the BB_Credit model used by the Fx_Port.
3 fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3 fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3 The number of loss of signal errors detected by the Fx_Port. fcFxPortPrimSeqProtoErrors 1.3.6.1.2.1.75.1.3.1.1.4 The number of primitive sequence protocol errors detected by the Fx_Port. fcFxPortInvalidTxWords 1.3.6.1.2.1.75.1.3.1.1.5 The number of invalid transmission word errors detected by the Fx_Port. fcFxPortInvalidCrcs 1.3.6.1.2.1.75.1.3.1.1.
feFcAccounting Group 3 feFcAccounting Group The Accounting group is supported only in Fabric OS v4.x. The Accounting group consists of the following tables: • Class 1 accounting table • Class 2 accounting table • Class 3 accounting table Each table contains accounting information for the Fx_Ports in the fabric element. fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.
3 fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 The number of F_BSY frames generated by this Fx_Port against Class 1 connect-request. fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 The number of F_RJT frames generated by this Fx_Port against Class 1 connect-request. fcFxPortC1InConnections 1.3.6.1.2.1.75.1.4.1.1.8 The number of Class 1 connections successfully established in which the attached Nx_Port is the source of the connect-request.
fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 3 fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 The number of Class 2 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port. fcFxPortC2OutOctets 1.3.6.1.2.1.75.1.4.2.1.4 The number of Class 2 frame octets, including the frame delimiters, delivered through this Fx_Port to its attached Nx_Port. fcFxPortC2Discards 1.3.6.1.2.1.75.1.4.2.1.5 The number of Class 2 frames discarded by this Fx_Port. fcFxPortC2FbsyFrames 1.3.6.
3 fcFxPortC3InOctets 1.3.6.1.2.1.75.1.4.3.1.3 fcFxPortC3InOctets 1.3.6.1.2.1.75.1.4.3.1.3 The number of Class 3 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port. fcFxPortC3OutOctets 1.3.6.1.2.1.75.1.4.3.1.4 The number of Class 3 frame octets, including the frame delimiters, delivered through this Fx_Port to its attached Nx_Port. fcFxPortC3Discards 1.3.6.1.2.1.75.1.4.3.1.5 The number of Class 3 frames discarded by this Fx_Port.
fcFxPortCapBbCreditMax 1.3.6.1.2.1.75.1.5.1.1.3 3 fcFxPortCapBbCreditMax 1.3.6.1.2.1.75.1.5.1.1.3 The maximum number of receive buffers available for holding Class 1 connect-request, and Class 2 or Class 3 frames from the attached Nx_Port. fcFxPortCapBbCreditMin 1.3.6.1.2.1.75.1.5.1.1.4 The minimum number of receive buffers available for holding Class 1 connect-request, and Class 2 or Class 3 frames from the attached Nx_Port. fcFxPortCapRxDataFieldSizeMax 1.3.6.1.2.1.75.1.5.1.1.
3 fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12 fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12 The maximum holding time (in microseconds) that the Fx_Port is capable of supporting. fcFxPortCapHoldTimeMin 1.3.6.1.2.1.75.1.5.1.1.13 The minimum holding time (in microseconds) that the Fx_Port is capable of supporting.
FCFABRIC-ELEMENT-MIB (Experimental Branch) 3 FCFABRIC-ELEMENT-MIB (Experimental Branch) NOTE The FCFABRIC-ELEMENT-MIB is supported only in Fabric OS v2.6.x and v3.0.x. This section contains descriptions and other information that is specific to FCFABRIC-ELEMENT-MIB (in the experimental branch), including the following: • • • • • • • FCFABRIC-ELEMENT-MIB Organization . . . . . . . . . . . 73 Definitions for FCFABRIC-ELEMENT-MIB . . . . . . . . . . 77 fcFeConfig Group . . . . . . . . . . . . . . . . . . .
3 FCFABRIC-ELEMENT-MIB Organization - fcFxPortOperTable - fcFxPortPhysTable - fcFxlogiTable - fcFeError - fcFxPortErrorTable - fcFeAcct - fcFxPortC1AcctTable - fcFxPortC2AcctTable - fcFxPortC3AcctTable - fcFeCap - fcFxPortCapTable FIGURE 23 74 FCFABRIC-ELEMENT-MIB Overall Tree Structure Fabric OS MIB Reference 53-1000602-01
FCFABRIC-ELEMENT-MIB Organization 3 - fcFeConfig - fcFabricName 1.3.6.1.3.42.2.1.1.1 - fcElementName 1.3.6.1.3.42.2.1.1.2 - fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 - fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 - fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 - fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 - fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 - fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 - fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 - fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 - fcFeModuleFxPortCapacity 1.3.6.1.3.
3 FCFABRIC-ELEMENT-MIB Organization - fcFeOp - fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 - fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 - fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 - fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 - fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 - fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 - fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 - fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 - fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 - fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.
Definitions for FCFABRIC-ELEMENT-MIB FIGURE 26 3 fcFeError Hierarchy - fcFeAcct (-- Not Supported --) FIGURE 27 fcFeAcct Hierarchy - fcFeCap - fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 - fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 - fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 - fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 - fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 - fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 - fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.
3 Definitions for FCFABRIC-ELEMENT-MIB TABLE 8 FCFABRIC-ELEMENT-MIB Definitions (Continued) Type Definition Value Description FabricName FcNameId The name identifier of a fabric. Each fabric provides a unique fabric name. Only the following formats are allowed: IEEE48 Local FcPortName FcNameId The name identifier associated with a port.
fcFeConfig Group TABLE 8 3 FCFABRIC-ELEMENT-MIB Definitions (Continued) Type Definition Value Description Fc0Medium Integer 1 (unknown) 2 (sm) 4 (m5) 8 (m6) 16 (tv) 32 (mi) 64 (stp) 128 (tw) 256 (lv) Fc0TxType Integer 1 (unknown) 2 (longWaveLaser (LL)) 3 (shortWaveLaser (SL)) 4 (longWaveLED (LE)) 5 (electrical (EL)) 6 (shortWaveLaser-noOFC (SN)) Fc0Distance Integer The FC-0 distance range associated with a port transmitter: 1 (unknown) 2 (long) 3 (intermediate) 4 (short) FcFeModuleCapacity
3 fcElementName 1.3.6.1.3.42.2.1.1.2 fcElementName 1.3.6.1.3.42.2.1.1.2 The Name_Identifier of the fabric element. Return Returns the WWN of the switch. fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 The maximum number of modules in the fabric element, regardless of their current state. The Brocade 12000, 24000, and 48000 directors do not support this MIB variable. The Value for fcFeModuleCapacity is always 1 for all the supported switches.
fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 3 For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor “Neufe Inc.” was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its ‘FeFiFo-16 PlugInCard.’ See “sysObjectID 1.3.6.1.2.1.1.2” on page 19. fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 Indicates the operational status of the module: • • • • online (1) The module is functioning properly. offline (2) The module is not available.
3 fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 An entry containing the configuration and service parameters of an Fx_Port. Index FcFxConfModuleIndex, fcFxConfFxPortIndex fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 Identifies the module containing the Fx_Port for which this entry contains information. fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.1.5.1.2 Identifies the Fx_Port within the module.
fcFxPortRatov 1.3.6.1.3.42.2.1.1.5.1.8 3 fcFxPortRatov 1.3.6.1.3.42.2.1.1.5.1.8 The Resource_Allocation_Timeout Value configured for the Fx_Port. This is used as the time-out value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents E_D_TOV (see “fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8” on page 59) plus twice the maximum time that a frame might be delayed within the fabric and still be delivered. fcFxPortEdtov 1.3.6.1.3.42.2.1.1.5.1.
3 fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 A flag indicating whether Class 2 sequential delivery is supported by the Fx_Port. Values Possible values are: • yes (1) • no (2) fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.14 A flag indicating whether Class 3 sequential delivery is supported by the Fx_Port. Values Possible values are: • yes (1) • no (2) fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.
fcFeOp Group 3 fcFeOp Group This group consists of tables that contain operational status and established service parameters for the fabric element and the attached Nx_Ports. NOTE Implementation of this group is mandatory. fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 A table that contains one entry for each Fx_Port in the fabric element, operational status, and parameters of the Fx_Ports. fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 An entry containing operational status and parameters of an Fx_Port.
3 fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is ‘000000’H, this Fx_Port is not engaged in a connection. This variable has been deprecated and might be implemented for backward compatibility. fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.
fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 3 fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 The desired state of the Fx_Port: • online (1) Place port online • offline (2) Take port offline • testing (3) Initiate test procedures A management station might place the Fx_Port in a desired state by setting this object accordingly. The testing state (3) indicates that no operational frames can be passed.
3 fcFxlogiTable 1.3.6.1.3.42.2.1.2.4 fcFxlogiTable 1.3.6.1.3.42.2.1.2.4 A table that contains, one entry for each Fx_Port in the fabric element, services parameters established from the most recent fabric login, explicit or implicit. fcFxlogiEntry 1.3.6.1.3.42.2.1.2.4.1 An entry containing service parameters established from a successful fabric login. Index fcFxloginModuleIndex, fcFxloginFxPortIndex, fcFxloginNxPortIndex fcFxlogiModuleIndex 1.3.6.1.3.42.2.1.2.4.1.
fcFxPortCosSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.7 3 fcFxPortCosSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.7 Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of services and the Fx_Port has granted the request. fcFxPortIntermixSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.8 A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix support and the Fx_Port has granted the request. This flag is only valid if Class 1 service is supported.
3 fcFxPortConnectedNxPort 1.3.6.1.3.42.2.1.2.4.1.13 fcFxPortConnectedNxPort 1.3.6.1.3.42.2.1.2.4.1.13 The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is ‘000000’H, this Fx_Port is not engaged in a connection. fcFxPortBbCreditModel 1.3.6.1.3.42.2.1.2.4.1.14 Identifies the BB_Credit model used by the Fx_Port.
fcFxPortLinkFailures 1.3.6.1.3.42.2.1.3.1.1.3 3 fcFxPortLinkFailures 1.3.6.1.3.42.2.1.3.1.1.3 The number of link failures detected by this Fx_Port. fcFxPortSyncLosses 1.3.6.1.3.42.2.1.3.1.1.4 The number of loss of synchronization errors detected by the Fx_Port. fcFxPortSigLosses 1.3.6.1.3.42.2.1.3.1.1.5 The number of loss of signal errors detected by the Fx_Port. fcFxPortPrimSeqProtoErrors 1.3.6.1.3.42.2.1.3.1.1.6 The number of primitive sequence protocol errors detected by the Fx_Port.
3 fcFxPortOlsOuts 1.3.6.1.3.42.2.1.3.1.1.14 fcFxPortOlsOuts 1.3.6.1.3.42.2.1.3.1.1.14 The number of Offline Sequence errors issued by this Fx_Port. fcFeAcct Group Brocade does not support Accounting tables; this section is not applicable. fcFeCap Group This group consists of a table describing information about what each Fx_Port is inherently capable of operating or supporting. A capability might be used or not, as expressed in its respective object value in the Configuration group.
fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 3 fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 The maximum number of receive buffers available for holding Class 1 connect-request Class 2 or Class 3 frames from the attached Nx_Port. fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.6 The minimum number of receive buffers available for holding Class 1 connect-request Class 2 or Class 3 frames from the attached Nx_Port. fcFxPortCapRxDataFieldSizeMax 1.3.6.1.3.42.2.1.5.1.1.
3 fcFxPortCapClass2SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.12 fcFxPortCapClass2SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.12 A flag indicating whether the Fx_Port is capable of supporting Class 2 Sequential Delivery. Values Possible values are: • yes (1) • no (2) fcFxPortCapClass3SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.13 A flag indicating whether the Fx_Port is capable of supporting Class 3 Sequential Delivery. Values Possible values are: • yes (1) • no (2) fcFxPortCapHoldTimeMax 1.3.6.1.3.42.2.1.5.1.1.
Chapter Entity MIB Objects 4 This chapter provides descriptions and other information specific to Entity MIB object types and includes the following information: • • • • • • • • • Entity MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Textual Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Entity MIB Objects. . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Physical Entity Group . . . . . . . . . . . . . . . . . . . . . . . . 100 Logical Entity Group . . .
4 Entity MIB Overview ENTITY MIB SYSTEM ORGANIZATION OF MIB OBJECTS Figure 29 through Figure 36 depict the organization and structure of the Entity MIB file system. - iso - org - dod - internet - mgmt - mib-2 - entityMIB - entityMIBObjects - entityPhysical - entityLogical - entityMapping - entityGeneral - entityMIBTraps - entityMIBTrapPrefix - entityConformance - entityCompliances - entityGroups FIGURE 29 Overall Tree Structure for Entity MIB - entityPhysical - entPhysicalTable 1.3.6.1.2.1.47.1.1.
Entity MIB Overview 4 - entityMapping - entLPMappingTable 1.3.6.1.2.1.47.1.3.1 - entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 - entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1 - entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 - entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 - entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 - entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 - entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 - entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 - entPhysicalChildIndex 1.3.6.1.2.1.47.1.3.3.1.
4 Textual Conventions TABLE 9 Objects Imported into the Entity MIB (Continued) Object Imported from this module TDomain SNMPv2-TC TAddress TEXTUAL-CONVENTION AutonomousType RowPointer TimeStamp TruthValue MODULE-COMPLIANCE SNMPv2-CONF OBJECT-GROUP NOTIFICATION-GROUP SnmpAdminString SNMP-FRAMEWORK-MIB Textual Conventions PhysicalIndex Arbitrary value that uniquely identifies the physical entity.
SnmpEngineIdOrNone TABLE 10 4 Possible Values for PhysicalClass (Continued) Values Description container (5) The physical entity class is capable of containing one ore more removable physical entities, possibly of different types (such as a chassis slot or daughter-card holder). For example, each (empty or full) slot in a chassis is modeled as a container. Note that all removable physical entities should be modeled within a container entity, such as field-replaceable modules, fans, or power supplies.
4 Entity MIB Objects Entity MIB Objects The Entity MIB objects are divided into the following groups: • • • • Physical Entity Group . . . . . . . . . . . . . . . . . . . . . . . . 100 Logical Entity Group . . . . . . . . . . . . . . . . . . . . . . . . . 108 Entity Mapping Group . . . . . . . . . . . . . . . . . . . . . . . . 111 General Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 The following sections list the MIBs in each group. Physical Entity Group entPhysicalTable 1.3.6.
entPhysicalTable 1.3.6.1.2.1.47.1.1.1 4 This object is implemented for Fabric OS v6.0.0. The “overall” physical entry for Brocade is the chassis, and in Fabric OS v6.0.0 it is marked as a FRU.
4 entPhysicalEntry 1.3.6.1.2.1.47.1.1.1.1 Chassis: one entry Container: one entry for each FRU slot Power supply if the PS is not a FRU, it will be directly below the chassis FIGURE 36 Module if the Module is not a FRU, it will be directly below the chassis Fan If the Fan is not a FRU, it will be directly below the chassis entPhysicalTable Containment Hierarchy (entPhysicalContainsTable) entPhysicalEntry 1.3.6.1.2.1.47.1.1.1.1 Information about a particular physical entity.
entPhysicalContainedIn 1.3.6.1.2.1.47.1.1.1.1.4 4 An agent should set this object to an enterprise-specific registration identifier value, indicating the specific equipment type in detail. The associated instance of entPhysicalClass indicates the general type of hardware device. If no vendor-specific registration identifier exists for this physical entity, or if the value is unknown by this agent, then the value { 0, 0 } is returned. Returns Currently, NULL OID { 0, 0 } is returned.
4 entPhysicalParentRelPos 1.3.6.1.2.1.47.1.1.1.1.6 Brocade 4100 switches can have the following hierarchy of physical objects: - Chassis: One entry (one row) Container: One entry for each FRU slot (one switch blade, two power supplies, three fans) Module: 1 entry for switch blade, up to two entries for power supplies, and up to three entries for fans.
entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 4 entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 The textual name of the physical entity (physical name of the entity such as chassis, blade, port, and so on). The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the device’s “console.
4 entPhysicalFirmwareRev 1.3.6.1.2.1.47.1.1.1.1.9 entPhysicalFirmwareRev 1.3.6.1.2.1.47.1.1.1.1.9 The vendor-specific firmware revision string for the physical entity. Note that if revision information is stored internally in a nonprintable (for example, binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner.
entPhysicalMfgName 1.3.6.1.2.1.47.1.1.1.1.12 4 Set to serial number and part number (if available), respectively. NOTE For the Brocade 4024 blade, entPhysicalSerialNum displays the vendor-specific serial number; for other switches it displays the factory serial number. entPhysicalMfgName 1.3.6.1.2.1.47.1.1.1.1.12 The name of the manufacturer of this physical component. The preferred value is the name actually printed on the component (if present).
4 entPhysicalAssetID 1.3.6.1.2.1.47.1.1.1.1.15 entPhysicalAssetID 1.3.6.1.2.1.47.1.1.1.1.15 This object is a user-assigned asset tracking identifier for the physical entity as specified by a network manager; it provides nonvolatile storage of this information. On the first instantiation of a physical entity, the value of entPhysicalAssetID associated with that entity is set to the zero-length string. Not every physical component has an asset tracking identifier or even need one.
entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1 4 entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1 Information about a particular logical entity. Entities might be managed by this agent or other SNMP agents in the same chassis. Index entLogicalIndex entLogicalIndex 1.3.6.1.2.1.47.1.2.1.1.1 The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are not necessarily contiguous. entLogicalDescr 1.3.6.1.2.1.47.1.2.1.1.
4 entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5 For agents not accessible through SNMPvl or SNMPv2C, the value of this object is the empty string. This object might also contain an empty string if a community string has not yet been assigned by the agent, or no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated.
Entity Mapping Group 4 Entity Mapping Group entLPMappingTable 1.3.6.1.2.1.47.1.3.1 This table contains zero or more rows of logical entity to physical equipment associations. For each logical entity known by this agent, there are zero or more mappings to the physical resources used to realize that logical entity. An agent should limit the number and nature of entries in this table such that only meaningful and nonredundant information is returned.
4 entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 Information about a particular physical equipment, logical entity to external identifier binding. Each logical entity/physical component pair might be associated with one alias mapping. The logical entity index might also be used as a wildcard (see “entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1” on page 112 for details.
entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 4 For example, suppose a physical port was represented by entPhysicalEntry.3, entLogicalEntry.15 existed for a repeater, and entLogicalEntry.22 existed for a bridge. Then there might be two related instances of entAliasMappingIdentifier: entAliasMappingIdentifier.3.15 == rptrPortGroupIndex.5.2 entAliasMappingIdentifier.3.22 == ifIndex.17 It is possible that other mappings (besides interfaces and repeater ports) might be defined in the future, as required.
4 Entity MIB Trap Entity MIB Trap This section lists the entityMIBTrap objects. entConfigChange 1.3.6.1.2.1.47.2.0.1 An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent should not generate more than one entConfigChange notification event in a given time interval (five seconds is the suggested default).
entity2Compliance 1.3.6.1.2.1.47.3.1.2 4 entity2Compliance 1.3.6.1.2.1.47.3.1.2 The compliance statement for SNMP entities that implement version 2 of the Entity MIB. Mandatory Groups 1: entityPhysicalGroup 2: entityPhysical2Group 3: entityGeneralGroup 4: entityNotificationsGroup Components 1. Type: Group Group: entityLogical2Group Description: Implementation of this group is not mandatory for agents which model all MIB object instances within a single naming scope. 2.
4 entityLogicalGroup 1.3.6.1.2.1.47.3.2.2 entityLogicalGroup 1.3.6.1.2.1.47.3.2.2 The collection of objects used to represent the list of logical entities, for which a single agent provides management information. Objects 1: entLogicalDescr 2: entLogicalType 3: entLogicalCommunity 4: entLogicalTAddress 5: entLogicalTDomain Status Deprecated entityMappingGroup 1.3.6.1.2.1.47.3.2.
entityLogical2Group 1.3.6.1.2.1.47.3.2.7 4 3: entPhysicalSoftwareRev 4: entPhysicalSerialNum 5: entPhysicalMfgName 6: entPhysicalModelName 7: entPhysicalAlias 8: entPhysicalAssetID 9: entPhysicalIsFRU entityLogical2Group 1.3.6.1.2.1.47.3.2.7 The collection of objects used to represent the list of logical entities, for which a single SNMP entity provides management information.
4 118 entityLogical2Group 1.3.6.1.2.1.47.3.2.
Chapter 5 SW-MIB Objects This chapter contains descriptions and other information specific to FC Switch MIB (SW-MIB) object types. This chapter provides information on: • • • • • • • • • • • • • SW MIB Overview . . . . . . . . . . . . . . . . . . . . . . . 119 next sw Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 swSystem Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 swFabric Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 SW MIB Overview - swAgtCfg - swFCport - swNs - swEvent - swFwSystem - swEndDevice - swGroup - swBlmPerfMnt - swTrunk - sw28k - sw21kN24k - sw20x0 - bsciReg - bsciModules - sw21kN24k - sw20x0 FIGURE 37 SW-MIB Overall Tree Structure - swTrapsV2 - swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 - swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 - swFCPortScn 1.3.6.1.4.1.1588.2.1.1.1.0.3 - swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 - swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5 - swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.
SW MIB Overview 5 - swSystem - swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 - swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 - swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 - swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 - swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 - swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 - swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 - swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 - swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 - swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.
5 SW MIB Overview - swFabric - swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 - swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 - swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 - swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.9 - swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.9.1 - swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.1 - swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.2 - swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 - swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.4 - swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5 - swNbIslState 1.3.6.1.4.1.
SW MIB Overview 5 - swFCport (1.3.6.1.4.1.1588.2.1.1.1.6) - swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 - swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 - swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 - swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 - swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 - swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 - swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 - swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 - swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
5 SW MIB Overview - swNs - swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 - swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 - swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 - swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 - swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 - swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 - swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 - swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 - swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 - swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.
SW MIB Overview 5 - swFwSystem - swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 - swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 - swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 - swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 - swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 - swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 - swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 - swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 - swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
5 SW MIB Overview - swEndDevice - swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 - swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 - swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 - swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 - swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 - swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 - swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 - swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 - swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.
SW MIB Overview 5 - swTrunk - swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 - swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 - swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 - swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 - swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 - swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 - swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 - swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 - swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 - swTrunkGrpNumber 1.3.6.1.4.1.
5 SW MIB Overview TEXTUAL CONVENTIONS FOR SW-MIB The following textual conventions are used for SW-MIB. TABLE 12 SW-MIB Textual Conventions Type Definition Value Description FcWwn Octet String of size 8 The World Wide Name (WWN) of Brocade-specific products and ports. SwDomainIndex Integer of size 1 to 239 Fibre Channel domain ID of the switch. SwNbIndex Integer of size 1 to 2048 Index of the neighbor inter-switch link (ISL) entry.
SW MIB Overview TABLE 12 5 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwClassesAreas Integer Classes and area index: 1 swFwEnvTemp 2 swFwEnvFan 3 swFwEnvPs 4 swFwTransceiverTemp 5 swFwTransceiverRxp 6 swFwTransceiverTxp 7 swFwTransceiverCurrent 8 swFwPortLink 9 swFwPortSync 10 swFwPortSignal 11 swFwPortPe 12 swFwPortWords 13 swFwPortCrcs 14 swFwPortRXPerf 15 swFwPortTXPerf 16 swFwPortState 17 swFwFabricEd 18 swFwFabricFr 19 swFwFabricDi 20 swFwFabricSc 21 swFwFabricZ
5 sw Traps TABLE 12 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwStatus Integer Status for thresholds: 1 disabled 2 enabled SwFwEvent Integer Possible events available: 1 started 2 changed 3 exceeded 4 below 5 above 6 inBetween SwFwBehavior Integer Behavior type for thresholds: 1 triggered 2 continuous SwFwState Integer State type for last events: 1 swFwInformative 2 swFwNormal 3 swFwfaulty SwFwLicense Integer License state: 1 swFwLicensed 2 swFwNotLicens
swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 TABLE 13 5 SW MIB Traps (Continued) Name Specific When Configure “swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5” on page 134 5 Threshold reached Fabric OS Command: fwConfigure “swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6” on page 135 6 Login/logout Fabric OS Command: trackChangesSet and trackChangesShow See the Fabric OS Command Reference and the snmpMibCapSet command on how to enable or disable the sending of traps from the various MIBs.
5 swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 (Obsoleted by swFabricWatchTrap) Enterprise Variables sw “swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3” “swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1” “swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2” “swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4” “swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.
swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 #SEVERITY #TIMEINDEX #STATE 5 Informational 1 Operational Sample trap output for Fabric OS 4.4.0: swFCPortOpStatus.11 = offline(2) swFCPortIndex.11 = 11 swFCPortName.11 = test swSsn.0 = none swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 Enterprise Variables sw “swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1” “swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2” “swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3” “swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.
5 swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5 swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5 Enterprise Variables sw “swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1” “swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1” “swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3” “swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4” “swFwLastEvent 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.6” “swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7” “swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8” “swFwLastState 1.3.6.1.4.1.
swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6 5 swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6 Enterprise Variables sw “swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” Trap to be sent for tracking login/logout/configuration changes. #TYPE #SUMMARY #ARGUMENTS #SEVERITY #TIMEINDEX #STATE Track changes has generated a trap.
5 swSystem Group swSystem Group swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 The current date and time. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 The date and time when the system last booted.
swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 5 swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 The date and time when the firmware was last loaded to the switch. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.
5 swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 The date and time when the BootPROM was last updated. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example: Thu Aug 17 15:16:09 2000 swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 The current version of the firmware.
swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 5 swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 The desired administrative status of the switch. A management station might place the switch in a desired state by setting this object accordingly. Values Possible values are: • • • • • • online (1) Set the switch to be accessible by an external FC port. offline (2) Set the switch to be inaccessible. testing (3) Set the switch to run the built-in test. faulty (4) Set the switch to a “soft” faulty condition.
5 Flash Administration Flash Administration The next six objects are related to firmware or configuration file management. Due to security restrictions, firmwaredownload and configuration file upload and download are no longer supported through SNMP, in Fabric OS v4.4 and above. swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11 The operational status of the flash. This OID cannot be used for either Firmwaredownload or Configdownload (cannot be set and is readonly) for FOS v4.4 and above.
swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 5 This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for FOS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in FOS v6.0.0. swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 The name of the file to be downloaded or uploaded. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for FOS v4.4 and above.
5 swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 The number of sensors inside the switch. The Brocade DCX value is between 1 and 57 (temperature =50, fan = 3, power supply = 4). The value might vary depending on the switch model. For Fabric OS v6.0.0, if no sensor is available, this variable is assigned the value -1. swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 Table of sensor entries.
swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 5 The values are 1 through the value in swNumSensors. swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 The type of sensor. swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 The current status of the sensor. Values Possible values are: • • • • • • 1: unknown (1) 2: faulty (2) 3: below-min (3) The sensor value is below the minimal threshold. 4: nominal (4) 5: above-max (5) The sensor value is above the maximum threshold. 6: absent (6) The sensor is missing.
5 swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23 swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23 Track changes string; for trap only. If there are no events to track, the default return value is “No event so far.” If there are events to track, the following are valid return values: • • • • • • Successful login Unsuccessful login Logout Configuration file change from task [name of task] Track-changes on Track-changes off swID 1.3.6.1.4.1.1588.2.1.1.1.1.24 Not supported in Fabric OS v3.2.0.
swFabric Group 5 swFabric Group swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 The current Fibre Channel domain ID of the switch. To set a new value, the switch (swAdmStatus) must be in offline or testing state. swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 Indicates whether the switch is the principal switch. Values Possible values are: • yes (1) • no (2) swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 The number of inter-switch links (ISLs) in the (immediate) neighborhood. swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.
5 swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3 This is the Fibre Channel domain on the other end of the ISL. This is the domain ID of the remote switch.Valid values are 1 through 239 as defined by FCS-SW. swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.4 This is the port index on the other end of the ISL. The physical port number of the remote switch, plus 1.
swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.8 5 swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.8 The WWN of the remote port. swFabricMemTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 Supported in Fabric OS v2.6.1 and not v3.2.0. This table contains information on the member switches of a fabric. This might not be available on all versions of Fabric OS. swFabricMemEntry 1.3.6.1.4.1.1588.2.1.1.1.2.10.1 An entry containing each switch in the fabric. Index swFabricMemWwn swFabricMemWwn 1.3.6.1.4.1.1588.2.1.1.1.2.
5 swFabricMemShortVersion 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.8 swFabricMemShortVersion 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.8 This object identifies the Fabric OS version of the member switch. Provides the short version of the Fabric OS version number. swIDIDMode 1.3.6.1.4.1.1588.2.1.1.1.2.11 This identifies the status of Insistent Domain ID (IDID) mode. Status indicating if IDID mode is enabled or not. SW Agent Configuration Group swAgtCmtyTable 1.3.6.1.4.1.1588.2.1.1.1.4.
swAgtCmtyStr 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2 5 swAgtCmtyStr 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2 This is a community string supported by the agent. If a new value is set successfully, it takes effect immediately. Default values for communities are as follows: • • • • • • 1 (Secret Code) 2 (OrigEquipMfr) 3 (private) 4 (public) 5 (common) 6 (FibreChannel) Community strings 1-3 are read-write and strings 4-6 are read-only. You can change the community setting using the snmpconfig command. swAgtTrapRcp 1.
5 Fibre Channel Port Group Fibre Channel Port Group This group contains information about the physical state, operational status, performance, and error statistics of each Fibre Channel port on the switch. A Fibre Channel port is one which supports the Fibre Channel protocol, such as F_Port, E_Port, U_Port, or FL_Port. swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 The maximum number of Fibre Channel ports on this switch. It includes U_Port, F_Port, FL_Port, and any other types of Fibre Channel port.
swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 5 swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 The switch port index. Values The physical port number of the switch, plus 1. The valid values for the Brocade 12000, 24000, and 48000 directors are 0 through maximum number of ports. swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 The type of ASIC for the switch port.
5 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 The operational status of the port. Values Possible values are: • • • • • unknown (0) The port module is physically absent. online (1) User frames can be passed. offline (2) No user frames can be passed. testing (3) No user frames can be passed. faulty (4) The port module is physically faulty. swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 The desired state of the port.
swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 5 swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 Indicates the media transmitter type of the port. Values Possible values are: • • • • • unknown (1) Cannot determine the port driver. lw (2) Long wave laser. sw (3) Short wave laser. ld (4) Long wave LED. cu (5) Copper (electrical). swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 Counts the number of Fibre Channel words that the port has transmitted.
5 swFCPortRxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 swFCPortRxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 Counts the number of multicast frames that the port has received. swFCPortTooManyRdys 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 Counts the number of times that RDYs exceeds the frames received. swFCPortNoTxCredits 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 Counts the number of times that the transmit credit has reached 0. swFCPortRxEncInFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 5 swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 Counts the number of multicast frames that have been timed out. swFCPortTxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 Counts the number of multicast frames that have been transmitted. swFCPortLipIns 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 Counts the number of loop initializations that have been initiated by loop devices attached. swFCPortLipOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
5 swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 This string indicates the physical port number of the addressed port. This string can be entered as argument on CLI commands such as portShow or wherever a physical port number is expected. The format of the string is: port, 'slot' being present only for bladed systems. For directors, such as Brocade 48000: swFCPortSpecifier.
swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 5 swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 The type of port for this entry. Values Possible values, as defined in FC-GS-2, are: • nPort (1) • nlPort (2) swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 The Fibre Channel WWN of the port entry. swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 The contents of a symbolic name of the port entry.
5 swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 The class of services supported by the port. This value is a hard-coded bitmap and indicates the supported services as follows: • • • • • • • • • • • • • • • Class F (1) Class 1 (2) Class F-1 (3) Class 2 (4) Class F-2 (5) Class 1-2 (6) Class F-1-2 (7) Class 3 (8) Class F-3 (9) Class 1-3 (10) Class F-1-3 (11) Class 2-3 (12) Class F-2-3 (13) Class 1-2-3 (14) Class F-1-2-3 (15) swNsFc4 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.
Event Group 5 Event Group Logically, the swEventTable is separate from the error log since it is essentially a view of the error log within a particular time window. swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1 swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4, in the absence of swEventTrapLevel, specifies the trap severity level of each defined trap recipient host. This object specifies the swEventTrap level in conjunction with an event’s severity level.
5 swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 The date and time that this event occurred. The return string is displayed using the following format: YYYY/MM/DD-hh:mm:ss Where: YYYY = Year MM = Month DD = Date hh = Hour mm = Minute ss = Seconds For example: 2005/12/05-07:33:41 swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 The severity level of this event entry.
Fabric Watch Group 5 Fabric Watch Group The Fabric Watch group contains one license scalar and two tables. • The scalar, swFwFabricWatchLicense, is used to tell is if the switch has proper license for Fabric Watch. • One table, “swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2”, contains classArea information such as threshold unit string, time base, low thresholds, and so forth. SwFwClassAreaEntry contains control information for a particular class/area's thresholds.
5 swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 A default unit string name, used to identify the unit of measure for a Fabric Watch classArea combination. C = environment (class), temperature (area). RPM = environment (class), fan (area). swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 A default polling period for the Fabric Watch classArea combination. swFwTbMin = port (class), link loss (area).
swFwCustHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.11 5 swFwCustHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.11 A customizable high-threshold value for a Fabric Watch classArea combination. swFwCustBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12 A customizable buffer size value for a Fabric Watch classArea combination. swFwThLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13 swFwThLevel is used to point to the current level for classArea values. It is either default or custom.
5 swFwWriteActVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 swFwWriteActVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 This applies or cancels the alarm value changes. For a read operation, the return value is always swFwCancelWrite. The following are the custom alarm variables that can be modified: swFwCustChangedActs swFwCustExceededActs swFwCustBelowActs swFwCustAboveActs swFwCustInBetweenActs Changes to these custom alarm variables can be saved by setting this variable to swFwApplyWrite.
swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 5 swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 Custom action matrix for an exceeded event. swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22 Custom action matrix for below event. swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.23 Custom action matrix for above event. swFwCustInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.24 Custom action matrix for in-between event. swFwValidActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
5 swFwThresholdTable 1.3.6.1.4.1.1588.2.1.1.1.10.3 swFwThresholdTable 1.3.6.1.4.1.1588.2.1.1.1.10.3 The table of individual thresholds. swFwThresholdEntry 1.3.6.1.4.1.1588.2.1.1.1.10.3.1 An entry of an individual threshold. Index swFwClassAreaIndex, swFwThresholdIndex swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 Represents the element index of a threshold. For environment class, the indexes are from 2 through (number of environment sensors+1).
swFwStatus 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2 5 swFwStatus 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2 Indicates whether a threshold is enabled or disabled. swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3 Name of the threshold. For examples, see Table 15.
5 swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.
swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7 5 swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7 Last event value of the threshold. swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8 Last event time of the threshold. This value is in the same format as in swCurrentDate. swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9 Last event state of the threshold. swFwBehaviorType 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.10 A behavior of which the thresholds generate event. swFwBehaviorInt 1.3.6.1.4.1.1588.2.1.1.1.
5 swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 This object represents the port of the local switch to which the end device is connected. This is an obsolete entry and does not show any value. swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 This object represents the AL_PA of the end device. SNMP AL_PA number should be the logical AL_PA number plus 1. For example, SNMP AL_PA number 0xf0 translates to 0xef.
swGroupTable 1.3.6.1.4.1.1588.2.1.1.1.22.1 5 swGroupTable 1.3.6.1.4.1.1588.2.1.1.1.22.1 The table of groups. This is not available on all versions of Fabric OS. swGroupEntry 1.3.6.1.4.1.1588.2.1.1.1.22.1.1 An entry of table of groups. Index swGroupIndex swGroupIndex 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.1 This object is the group index, starting from 1. swGroupName 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.2 This object identifies the name of the group. swGroupType 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.
5 ASIC Performance Monitoring Group ASIC Performance Monitoring Group swBlmPerfALPAMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.1 AL_PA monitoring counter table. For the Brocade 4100, 12 filter monitors per port are supported. swBlmPerfALPAMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.1.1 AL_PA monitoring counter for given AL_PA. Index swEndDevicePort, swEndDeviceAlpa swBlmPerfAlpaPort 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.1 This object identifies the port index of the switch. swBlmPerfAlpaIndx 1.3.6.1.4.1.1588.2.1.1.1.23.
swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 5 swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 This object identifies the port number of the switch. swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2 This object identifies the reference number of the counter. This reference is a number assigned when a filter is created. In the SNMP Index, start with one instead of 0, add one to the actual reference key. swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.
5 swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1 swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1 This object identifies the port number of the switch. swBlmPerfFltRefkey 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2 This object identifies the reference number of the filter. This reference number is assigned when a filter is created. In the SNMP Index, start with one instead of 0, add one to actual reference key. swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3 Get statistics of filter-based monitor.
swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 5 The value of a port index is extracted from the second octet of the port WWN stored in swFCPortWwn (see swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 in the Fibre Channel Port Group). swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 This object is a logical entity that specifies the group number to which the port belongs. If this value is 0, the port is not trunked. swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.
5 swTrunkGrpTx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 swTrunkGrpTx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 Gives the aggregate value of the transmitted words from this trunk group. NOTE The syntax for this MIB variable is an OCTET STRING. The output is shown in hexadecimal value. The value of swTrunkGrpTx is the 4-byte word transmitted in the TrunkGrp port. This value can be obtained through the CLI in the output of the portStatsShow command (stat_wtx value) for the corresponding trunk ports. swTrunkGrpRx 1.3.6.1.
Chapter High-Availability MIB Objects 6 This chapter provides descriptions and other information specific to High-Availability MIB object types and includes the following sections: • • • • • • HA MIB Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 High-Availability Group . . . . . . . . . . . . . . . . . . . . . . . 179 FRU Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 FRU History Table . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 CP Table.
6 HA MIB Overview - fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 - fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 - fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 - fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 - fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 - fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 - fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 - fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.6 - fruSupplierRevCode 1.3.6.1.4.1.1588.2.1.2.1.5.1.7 - fruHistoryTable 1.3.6.1.4.1.1588.2.1.2.1.6 - fruHistoryEntry 1.3.6.1.4.1.
High-Availability Group 6 High-Availability Group This section describes the MIB objects in the High-Availability group. haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 Indicates whether the system is redundant. Values Possible values are: • 1: redundant(0) Dual CP with standby CP ready to take over. • 2: nonredundant(1) Single or Dual CP system where the standby CP is not available to take over operation of the switch. FRU Table fruTable 1.3.6.1.4.1.1588.2.1.2.1.
6 fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 TABLE 17 Valid FRU Counts for the Various Brocade Switches Platform Blades Fans Power Supply WWN Card Brocade 48000 8 port blades 2 CP blades 3 fans 4 PS 1 WWN Brocade DCX Data Center Backbone Director 8 port blades 2 CP blades 3 fans 4 PS 2 WWN fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 An entry for FRU slot in the fruTable. Index entPhysicalIndex fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 The type of the FRU object that this slot can hold.
fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 6 fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 The supplier ID. fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 The supplier part number. fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.6 The supplier serial number. fruSupplierRevCode 1.3.6.1.4.1.1588.2.1.2.1.5.1.7 The supplier revision code. FRU History Table fruHistoryTable 1.3.6.1.4.1.1588.2.1.2.1.6 This table gives the contents of the entire history log of the FRU events. fruHistoryEntry 1.3.6.1.4.
6 fruHistoryClass 1.3.6.1.4.1.1588.2.1.2.1.6.1.2 fruHistoryClass 1.3.6.1.4.1.1588.2.1.2.1.6.1.2 The type of the FRU object related to the event. Values Possible values are: • • • • • • • • • 1: other(1) 2: unknown(2) 3: chassis(3) 4: cp(4) 5: other-CP(5) 6: switchblade(6) 7: wwn(7) 8: powerSupply(8) 9: fan(9) fruHistoryObjectNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.3 The slot number of the blade and the unit number for everything else. fruHistoryEvent 1.3.6.1.4.1.1588.2.1.2.1.6.1.4 The type of the FRU event.
CP Table 6 CP Table cpTable 1.3.6.1.4.1.1588.2.1.2.1.7 This table lists all the CPs in the system. cpEntry 1.3.6.1.4.1.1588.2.1.2.1.7.1 An entry represents a single CP in the system. Index entPhysicalIndex cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP. Values Possible values are: • • • • • 1: other(1) 2: unknown(2) 3: active(3) 4: standby(4) 5: failed(5) cpIpAddress 1.3.6.1.4.1.1588.2.1.2.1.7.1.2 The IP address of the Ethernet interface of this CP. cpIpMask 1.3.6.1.4.1.1588.
6 cpLastEvent 1.3.6.1.4.1.1588.2.1.2.1.7.1.5 cpLastEvent 1.3.6.1.4.1.1588.2.1.2.1.7.1.5 The last event related to this CP. Values Possible values are: • • • • • • • • • • • • 1: other(1) 2: unknown(2) 3: haSync(3) 4: haOutSync(4) 5: cpFaulty(5) 6: cpHealthy(6) 7: cpActive(7) 8: configChange(8) 9: failOverStart(9) 10: failOverDone(10) 11: firmwareCommit(11) 12: firmwareUpgrade(12) HA-MIB Traps This section lists the HA-MIB traps. fruStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.
cpStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.2 6 cpStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.2 Objects 1: cpStatus 2: cpLastEvent 3: swID 4: swSsn Status Current This trap is sent when the status of any CP object changes. The cpLastEvent variable provides the information about the event that occurred. Some of the triggers that will generate this trap are: • Reboot • firmwareDownload Sample trap output for Fabric OS v4.4.0: cpStatus.13 = standby(4) cpLastEvent.13 = cpHealthy(6) swID.0 = 1 swSsn.
6 fruHistoryTrap 1.3.6.1.4.1.1588.2.1.2.2.0.3 HA-MIB TRAPS AND SAMPLE TRIGGERS The following table lists the HA-MIB traps and sample events that will trigger them.
Chapter FICON MIB Objects 7 This chapter provides descriptions and other information specific to FICON MIB (LINK-INCIDENT-MIB) object types, including the following information: • • • • • FICON MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . 187 ficonRNID Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 ficonLIRR Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 ficonRLIR Group . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 FICON MIB Overview - private - enterprises - bsci - commDev - fibreChannel - fcSwitch - linkIncidentMIB - ficonRNID - ficonLIRR - ficonRLIR - linkIncidentMIBTraps FIGURE 53 Overall Tree Structure for FICON MIB (linkIncidentMIB) - linkIncidentMIB - ficonRNID - nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.1 - nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 - nodeRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 - nodeRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.1 - nodeRNIDIncidentPortWWN 1.3.6.1.4.1.1588.2.1.
FICON MIB Overview 7 - rLIREntry 1.3.6.1.4.1.1588.2.1.1.50.4.2.1 - rLIRIndex 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1 - rLIRIncidentPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.2 - rLIRIncidentNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.3 - rLIRIncidentPortType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.5 - rLIRIncidentPID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6 - rLIRIncidentPortNumber 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.7 - rLIRConnectedPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8 - rLIRConnectedNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.
7 FICON MIB Overview TABLE 19 190 FICON MIB Textual Conventions (Continued) Name Status Description Syntax RNIDTagType Current Represents the value of RNID Tag, in hexadecimal format. Note: Includes DISPLAY-HINT “x”. OCTET STRING (SIZE (2)) LinkWwn Current Represents the link WWN. OCTET STRING (SIZE (8)) RegType Current Represents the RNID Registration Type. INTEGER { conditional (1), unconditional (2) } RNIDSequenceNumber Current Sequence number of the self describing node.
ficonRNID Group 7 ficonRNID Group This group contains all Request Node Identification Data (RNID) group objects for FICON. nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.1 The number of entries in Request Node Identification Data (RNID) table. See the Fabric OS Command Reference and the ficonShow command for additional information on FICON MIB tables. nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 A table that contains one entry for each FICON RNID node attached to a switch. nodeRNIDEntry 1.3.6.1.4.
7 nodeRNIDModel 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.6 nodeRNIDModel 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.6 Model number of the RNID node. nodeRNIDManufacturer 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.7 Identifies the manufacturer of the node. nodeRNIDManufacturerPlant 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.8 Identifies the manufacturer plant of the node. nodeRNIDSequenceNumber 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.9 Identifies the sequence number of the node. nodeRNIDConnectedPortWWN 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.
switchRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.4 7 switchRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.4 A table that contains RNID information for each switch FICON node. switchRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.4.1 An entry containing the RNID information for the switch FICON node. switchRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.1 Index into switchRNIDTable. switchRNIDSwitchWWN 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.2 WWN of the switch. switchRNIDFlags 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.3 RNID flags for the switch.
7 switchRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.10 switchRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.10 Identifies the parameters of the switch. ficonLIRR Group This group contains all Link Incident Record Registration (LIRR) group objects for FICON. LIRRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.3.1 The number of entries in an LIRR table. See the Fabric OS Command Reference and the ficonShow command for additional information on FICON MIB tables. LIRRTable 1.3.6.1.4.1.1588.2.1.1.50.3.
LIRRPortType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 7 LIRRPortType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 Attached port type. LIRRFormat 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 Registration type: conditional or unconditional. ficonRLIR Group This group contains all Registered Link Incident Report (RLIR) group objects for FICON. rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.1 The number of entries in a switch RLIR table.
7 rLIRIncidentPID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6 rLIRIncidentPID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6 RLIR Incident PID. rLIRIncidentPortNumber 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.7 RLIR Incident port number. This is a vendor-specific port number. rLIRConnectedPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8 RLIR Connected port WWN. rLIRConnectedNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.9 RLIR Connected node WWN. rLIRFabricWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.10 RLIR Fabric WWN. rLIRLinkFailureType 1.3.6.1.4.1.
linkRNIDDeviceDeRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 Objects 7 1: nodeRNIDIndex 2: nodeRNIDIncidentPortWWN 3: nodeRNIDConnectedPortWWN linkRNIDDeviceDeRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 A device deregistered with the switch. Objects 1: nodeRNIDIndex 2: nodeRNIDIncidentPortWWN 3: nodeRNIDConnectedPortWWN linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 A listener for link failure incident is added.
7 198 linkRLIRFailureIncident 1.3.6.1.4.1.1588.2.1.1.50.21.0.
Chapter FibreAlliance MIB Objects 8 This chapter contains descriptions and other information specific to FibreAlliance MIB (FCMGMT-MIB) object types, including the following: • • • • • • • • FibreAlliance MIB Overview . . . . . . . . . . . . . . . . . . . 199 ConnSet Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Statistics Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Service Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 FibreAlliance MIB Overview FCMGMT-MIB SYSTEM ORGANIZATION OF MIB OBJECTS Figure 56 to Figure 66 depicts the high level organization of the FCMGMT-MIB. - iso - org - dod - internet - experimental - fcmgmt - connSet - uNumber 1.3.6.1.3.94.1.1 - systemURL 1.3.6.1.3.94.1.2 + connUnitTable 1.3.6.1.3.94.1.6 + connUnitRevsTable 1.3.6.1.3.94.1.7 + connUnitSensorTable 1.3.6.1.3.94.1.8 + connUnitPortTable 1.3.6.1.3.94.1.10 + connUnitEventTable 1.3.6.1.3.94.1.11 + connUnitLinkTable 1.3.6.1.3.94.1.
FibreAlliance MIB Overview FIGURE 56 8 FCMGMT-MIB High Level Hierarchy - connUnitTable 1.3.6.1.3.94.1.6 - connUnitEntry 1.3.6.1.3.94.1.6.1 - connUnitId 1.3.6.1.3.94.1.6.1.1 - connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 - connUnitType 1.3.6.1.3.94.1.6.1.3 - connUnitNumports 1.3.6.1.3.94.1.6.1.4 - connUnitState 1.3.6.1.3.94.1.6.1.5 - connUnitStatus 1.3.6.1.3.94.1.6.1.6 - connUnitProduct 1.3.6.1.3.94.1.6.1.7 - connUnitSn 1.3.6.1.3.94.1.6.1.8 - connUnitUpTime 1.3.6.1.3.94.1.6.1.9 - connUnitUrl 1.3.6.1.3.94.1.6.1.
8 FibreAlliance MIB Overview - connUnitPortTable 1.3.6.1.3.94.1.10 - connUnitPortEntry 1.3.6.1.3.94.1.10.1 - connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 - connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 - connUnitPortType 1.3.6.1.3.94.1.10.1.3 - connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 - connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 - connUnitPortState 1.3.6.1.3.94.1.10.1.6 - connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 - connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 - connUnitPortModuleType 1.3.6.1.3.94.1.10.1.
FibreAlliance MIB Overview 8 - connUnitLinkTable 1.3.6.1.3.94.1.12 - connUnitLinkEntry 1.3.6.1.3.94.1.12.1 - connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 - connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 - connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 - connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 - connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 - connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 - connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 - connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8 - connUnitLinkAgentAddressY 1.3.6.1.3.94.1.
8 FibreAlliance MIB Overview - connUnitPortStatTable 1.3.6.1.3.94.4.5 - connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 - connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 - connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 - connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3 - connUnitPortStatCountTxObjects 1.3.6.1.3.94.4.5.1.4 - connUnitPortStatCountRxObjects 1.3.6.1.3.94.4.5.1.5 - connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6 - connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 - connUnitPortStatCountBBCreditZero 1.
FibreAlliance MIB Overview 8 - connUnitServiceSet - connUnitServiceScalars - connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 FIGURE 65 ConnUnitServiceScalars Hierarchy - connUnitServiceSet - connUnitServiceTables - connUnitSnsTable 1.3.6.1.3.94.5.2.1 - connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 - connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 - connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 - connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.1.3 - connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 - connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.
8 FibreAlliance MIB Overview TABLE 20 Definitions for FCMGMT-MIB Type Definition Value Description FcEventSeverity Integer 1 (unknown) 2 (emergency) Emergency status. 3 (alert) Alert status. 4 (critical) Critical status. 5 (error) Error status. 6 (warning) Warning status. 7 (notify) Notification status. 8 (info) Informational status. 9 (debug) Debug status. 10 (mark) All messages logged. FcUnitType Integer 1 (unknown) 2 (other) None of 3–14.
ConnSet Group 8 ConnSet Group Implementation of the Connectivity group is mandatory for all systems. uNumber 1.3.6.1.3.94.1.1 The number of connectivity units present on this system (represented by this agent). Might be a count of the boards in a chassis or the number of full boxes in a rack. The connectivity unit is mapped to a switch. uNumber is always set to 1. systemURL 1.3.6.1.3.94.1.2 The top-level URL of the system; if it does not exist, the value is an empty string.
8 connUnitId 1.3.6.1.3.94.1.6.1.1 connUnitId 1.3.6.1.3.94.1.6.1.1 The unique identification for this connectivity unit among those within this proxy domain. The value must be unique within the proxy domain because it is the index variable for connUnitTable. The value assigned to a given connectivity unit should be persistent across agent and unit resets. It should be the same as connUnitGlobalId if connUnitGlobalId is known and stable.
connUnitType 1.3.6.1.3.94.1.6.1.3 8 If your hub has a built-in Ethernet port, it might be reasonable for the hub to use its LAN address (prefixed with the appropriate NAA) as its connUnitId. But if the Ethernet is a replaceable PCCard, the hub should have an independent ID. The Brocade implementation maps the switch WWN to the top 8 octets of this variable and sets the remaining lower 8 octets to 0.
8 connUnitState 1.3.6.1.3.94.1.6.1.5 connUnitState 1.3.6.1.3.94.1.6.1.5 Overall state of the connectivity unit. Values Possible values are: • unknown (1) • online (2) Set the state to online. • offline (3) Set the state to offline. Mapped as follows: switchState(ONLINE) 2 (online) switchState(not ONLINE) 3 (offline, testing, faulty) connUnitStatus 1.3.6.1.3.94.1.6.1.6 Overall status of the connectivity unit.
connUnitUpTime 1.3.6.1.3.94.1.6.1.9 8 connUnitUpTime 1.3.6.1.3.94.1.6.1.9 The number of centiseconds since the last unit initialization. Set when connUnitTable is initialized. connUnitUrl 1.3.6.1.3.94.1.6.1.10 URL to launch a management application, if applicable; otherwise an empty string. In a standalone unit, this would be the same as the top-level URL. This has the same definition as systemURL for keywords. (Same as systemURL.) The expected value for connUnitURL.0 is: “http://{a.b.c.d}” where {a.b.c.
8 connUnitNumSensors 1.3.6.1.3.94.1.6.1.14 If the switch is principal, this is set to 3 (yes); otherwise, for a fabric switch it is set to 2 (no). For a Brocade Access Gateway device, since the switch is behaving as a device management tool and not a Fibre Channel switch, the value is set to 1 (unknown). Values Possible values are: • unknown (1) • no (2) • yes (3) connUnitNumSensors 1.3.6.1.3.94.1.6.1.14 Number of sensors (between 0 and maximum number of sensors) in the connUnitSensorTable.
connUnitModuleId 1.3.6.1.3.94.1.6.1.19 8 connUnitModuleId 1.3.6.1.3.94.1.6.1.19 This is a unique ID, persistent between boots, that can be used to group a set of connUnits together into a module. The intended use would be to create a connUnit with a connUnitType of “module” to represent a physical or logical group of connectivity units. Then the value of the group would be set to the value of connUnitId for this “container” connUnit. connUnitModuleId should be 0s if this connUnit is not part of a module.
8 connUnitContact 1.3.6.1.3.94.1.6.1.23 • resetConnUnitWarmStart (4): Fastboot. The addressed unit performs a Warm Start reset. • offlineConnUnit (5): Disable switch. The addressed unit puts itself into an implementation-dependant offline state. In general, if a unit is in an offline state, it cannot be used to perform meaningful Fibre Channel work. • onlineConnUnit (6): Enable switch. The addressed unit puts itself into an implementation-dependant online state.
connUnitEventCurrID 1.3.6.1.3.94.1.6.1.28 8 For Fabric OS v4.4 this value is 1024. For Fabric OS v5.0.1 this value is 1024. For Fabric OS v6.0.0 this value ranges from 0 to 1024. connUnitEventCurrID 1.3.6.1.3.94.1.6.1.28 The last-used event ID (connUnitEventId). Maximum is 2147483647 (231-1). connUnitRevsTable 1.3.6.1.3.94.1.7 Table of the revisions supported by connectivity units managed by this agent. Usage Notes This table lists the versions of hardware and software elements in the switch.
8 connUnitRevsDescription 1.3.6.1.3.94.1.7.1.4 connUnitRevsDescription 1.3.6.1.3.94.1.7.1.4 Description of a component to which the revision corresponds. Index 1 returns the hardware version. Index 2 returns the software version. connUnitSensorTable 1.3.6.1.3.94.1.8 Table of the sensors supported by each connectivity unit managed by this agent. See Table 14 on page 142 for specific sensor counts on the various switches. connUnitSensorEntry 1.3.6.1.3.94.1.8.
connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 8 • Nominal = 3 (ok). connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 Miscellaneous static information about the sensor, such as its serial number. Each contains textual information about the sensor. Return Returns the serial ID if this is for the power supply; otherwise, returns Null. connUnitSensorMessage 1.3.6.1.3.94.1.8.1.6 This describes the status of the sensor as a message.
8 connUnitPortTable 1.3.6.1.3.94.1.10 The following mapping is for each individual sensor, where applicable: Values swSensorType connUnitSensorCharacteristic 1 (temperature) 2 (fan) 3 (power supply) 3 (temperature) 7 (airflow) 9 (power) Possible values are: • • • • • • • • • • unknown (1) other (2) temperature (3) pressure (4) emf (5) currentValue (6) Current is a keyword. airflow (7) frequency (8) power (9) door (10) Not supported in Fabric OS v2.6.1. connUnitPortTable 1.3.6.1.3.94.1.
connUnitPortType 1.3.6.1.3.94.1.10.1.3 8 To determine the maximum number of system supported ports, use the SNMP GET command on swFcPortCapacity. The Brocade switches support 0 to maximum number of system supported ports.
8 connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 • • • • wan (16) ac (17) AC power line. (Not supported in Fabric OS v2.6.1.) dc (18) DC power line. (Not supported in Fabric OS v2.6.1) ssa (19) Serial storage architecture. (Not supported in Fabric OS v2.6.1.) connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 Bit mask that specifies the classes of service capability of this port. If this is not applicable, return all bits set to 0.
connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 8 For an E, F, or FL_Port, the value is online. For a U_Port, the value is offline (disabled, testing, faulted). connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 An overall protocol status for the port. For a U_Port, the status should be ols (9). Values Possible values are: • • • • • • • • • unknown (1) unused (2) Device cannot report this status. ready (3) FCAL Loop or FCPH Link reset protocol initialization has completed. warning (4) Do not use.
8 connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 For an external FC_Port, this value should be 9 (shortwaveNoOFC), 8 (longwaveNoOFC), or 6 (copper). connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 The module type of the port connector.
connUnitPortSn 1.3.6.1.3.94.1.10.1.12 8 The FC ID is formatted “DD AA PP” (e.g., “02 00 02”). The Brocade Access Gateway port FC ID differs from a Fibre Channel switch. A Fibre Channel switch port FC ID has the same DD with a different AA value for each link. The Brocade Access Gateway “PP” is the port number for F_Ports and is always zero for N_Ports. Therefore the N_Port FC ID always appears as “DD AA 00” (e.g., “02 00 00”).
8 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 • bypassConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific “bypass” operation. Examples of these operations are: - Transitioning from online to offline. A request (NON-PARTICIPATING) command to the loop port state machine. Removal of the port from an arbitrated loop by a hub.
connUnitPortName 1.3.6.1.3.94.1.10.1.17 8 • Return values are: - resetConnUnitPort portDisable (F or E_Port, loop for U_Port) - bypassConnUnitPort portDisable (FL_Port) - unbypassConnUnitPort portEnable (FL_Port) - offlineConnUnitPort portDisable (E, F, FL_Port) - onlineConnUnitPort portEnable (U) - resetConnUnitPortCounters clear the port statistics counter. When rebooted, this defaults to 1 (unknown). connUnitPortName 1.3.6.1.3.94.1.10.1.17 A string describing the addressed port.
8 connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20 This contains the OID of the first object of the table that contains the statistics for this particular port. If this has a value of 0, then there are no statistics available for this port. The port type information helps identify the statistics objects found in the table. From this point, use the getnext command to get the next statistics object. When the first part of the OID changes, the end of table is reached. Mapped to connUnitPortStatFabricUnitId.
connUnitPortHWState 1.3.6.1.3.94.1.10.1.23 8 All related ports in within a group should have the same node WWN value. The container is defined as the largest physical entity. All ports on HBAs on a host will have the same node WWN. All ports on the same storage subsystem will have the same node WWN. This is in IEEE Extended format and the extension contains the internal port number of each port. The internal port number is 1 less than the port index.
8 connUnitEventEntry 1.3.6.1.3.94.1.11.1 connUnitEventEntry 1.3.6.1.3.94.1.11.1 Each entry contains information on a specific event for the given connectivity unit. Index connUnitEventUnitId connUnitEventIndex connUnitEventUnitId 1.3.6.1.3.94.1.11.1.1 The connUnitId of the connectivity unit that contains this event table. Same as connUnitId. connUnitEventIndex 1.3.6.1.3.94.1.11.1.2 Each connectivity unit has its own event buffer. As it wraps, it might write over previous events.
connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 8 DDMMYYYY HHMMSS Where: DD = day number MM = month number YYYY = year HH = hours MM = minutes SS = seconds If not applicable, returns a null string. connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 This is the sysuptime time stamp when the event occurred. connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 The event severity level.
8 connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 Values Always set to null. connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 The description of the event. Same as the string displayed in the system error log. The system error log can be viewed using the errShow or errDump commands. For Fabric OS v6.0.0, the format of error messages has changed. This field now uses the message title and number (for example, WEBD-1006) and the message text.
connUnitLinkEntry 1.3.6.1.3.94.1.12.1 8 A Brocade Access Gateway has no ISLs (InterSwitch Links); therefore all F_Port and N_Port connections display in ag --show for online F_Ports. connUnitLinkEntry 1.3.6.1.3.94.1.12.1 An entry describing a particular link to another. Index connUnitLinkUnitId connUnitLinkIndex connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 The connUnitId of the connectivity unit that contains this link table. Values Set to WWN of the local switch. connUnitLinkIndex 1.3.6.1.3.94.1.12.1.
8 connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node is a connUnit in the responding SNMP agency, then the value of this object must be equal to its connUnitID. ISL: WWN of the remote switch. Device: Node name of the device. connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 The port number on the unit specified by connUnitLinkNodeIdY, if known; otherwise, -1.
connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 8 connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 Type of the FC connectivity unit, as defined in connUnitType. • ISL: Switch device. • End devices: End device types based on an FCP Inquiry. Brocade does not support Hubs.
8 connUnitPortStatTable 1.3.6.1.3.94.4.5 connUnitPortStatTable 1.3.6.1.3.94.4.5 A list of statistics for the fabric port types. connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 An entry describing port statistics. Index connUnitPortStatUnitId connUnitPortStatIndex connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 The connUnitId of the connectivity unit that contains this port statistics table. connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.
connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 8 connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 The number of octets or bytes that have been received by this port. There is an one-second periodic polling of the port. This value is saved and compared with the next polled value to compute net throughput. For Fibre Channel, ordered sets are not included in the count. connUnitPortStatCountBBCreditZero 1.3.6.1.3.94.4.5.1.8 The number of transitions in/out of BB credit zero state.
8 connUnitPortStatCountPRJTFrames 1.3.6.1.3.94.4.5.1.13 This is the total for all classes and is a Fibre Channel only statistic. connUnitPortStatCountPRJTFrames 1.3.6.1.3.94.4.5.1.13 Supported. The number of times that FRJT was returned to this port as a result of a frame that was rejected at the destination N_Port. Return Value: 80 0 0 0 0 0 0 0 This is the total for all classes and is a Fibre Channel only statistic. connUnitPortStatCountClass1RxFrames 1.3.6.1.3.94.4.5.1.
connUnitPortStatCountClass1PRJTFrames 1.3.6.1.3.94.4.5.1.19 8 This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames. Return value: 80 0 0 0 0 0 0 0 connUnitPortStatCountClass1PRJTFrames 1.3.6.1.3.94.4.5.1.19 The number of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected at the destination N_Port. This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames.
8 connUnitPortStatCountClass2FRJTFrames 1.3.6.1.3.94.4.5.1.24 connUnitPortStatCountClass2FRJTFrames 1.3.6.1.3.94.4.5.1.24 The number of times that FRJT was returned to this port as a result of a Class 2 Frame that was rejected by the fabric. This is a Fibre Channel only statistic. Not supported. Return value: 80 0 0 0 0 0 0 0 connUnitPortStatCountClass2PRJTFrames 1.3.6.1.3.94.4.5.1.
connUnitPortStatCountRxBroadcastObjects 1.3.6.1.3.94.4.5.1.31 8 connUnitPortStatCountRxBroadcastObjects 1.3.6.1.3.94.4.5.1.31 The number of broadcast frames or packets received at this port. Not supported. Return value: 80 0 0 0 0 0 0 0 connUnitPortStatCountTxBroadcastObjects 1.3.6.1.3.94.4.5.1.32 The number of broadcast frames or packets transmitted out this port. On a Fibre Channel loop, count only OPNr frames generated. Not supported.
8 connUnitPortStatCountLinkFailures 1.3.6.1.3.94.4.5.1.39 This is a Fibre Channel only statistic. Not supported. Return Value: 80 0 0 0 0 0 0 0 connUnitPortStatCountLinkFailures 1.3.6.1.3.94.4.5.1.39 The number of link failures. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) This is a Fibre Channel only statistic. connUnitPortStatCountInvalidCRC 1.3.6.1.3.94.4.5.1.40 The number of frames received with invalid CRC. This count is part of the Link Error Status Block (LESB).
connUnitPortStatCountInvalidOrderedSets 1.3.6.1.3.94.4.5.1.45 8 connUnitPortStatCountInvalidOrderedSets 1.3.6.1.3.94.4.5.1.45 The number of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel only statistic. connUnitPortStatCountFramesTooLong 1.3.6.1.3.94.4.5.1.46 The number of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI.
8 connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 • Connectivity Unit Service Scalers Group • Connectivity Unit Service Tables Group Implementation of the Connectivity Unit Service Scalers group is mandatory for all systems. connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 The maximum number of entries in the table. connUnitSnsTable 1.3.6.1.3.94.5.2.1 This table contains an entry for each object registered with this port in the switch.
connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.5 8 connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.5 The node name for this entry in the SNS table. connUnitSnsClassOfSvc 1.3.6.1.3.94.5.2.1.1.6 The Classes of Service offered by this entry in the SNS table. connUnitSnsNodeIPAddress 1.3.6.1.3.94.5.2.1.1.7 The IPv6 formatted address of the Node for this entry in the SNS table. connUnitSnsProcAssoc 1.3.6.1.3.94.5.2.1.1.8 The process associator for this entry in the SNS table. Hard coded to FF. connUnitSnsFC4Type 1.3.6.
8 connUnitSnsSymbolicNodeName 1.3.6.1.3.94.5.2.1.1.15 connUnitSnsSymbolicNodeName 1.3.6.1.3.94.5.2.1.1.15 The symbolic node name of this entry in the SNS table. If the attached device has only the symbolicNodename, the symbolicNodename is shown and the symbolicPortname appears as "null". SNMP Trap Registration Group trapMaxClients 1.3.6.1.3.94.2.1 The maximum number of SNMP trap recipients supported by the connectivity unit. Set to 6. trapClientCount 1.3.6.1.3.94.2.
trapRegFilter 1.3.6.1.3.94.2.3.1.3 8 trapRegFilter 1.3.6.1.3.94.2.3.1.3 This value defines the trap severity filter for this trap host. The connUnit sends traps to this host that have a severity level less than or equal to this value. The default value of this object is Warning.
8 Revision Number Scalar Revision Number Scalar revisionNumber 1.3.6.1.3.94.3 This is the revision number for this MIB. The format of the revision value is as follows: 0 = High order major revision number 1 = Low order major revision number 2 = High order minor revision number 3 = Low order minor revision number The value is stored as an ASCII value. The following is the current value of this object: 0=0 1=3 2=0 3=0 This defines a revision of 03.00. Set to 0300.
connUnitDeletedTrap 8 connUnitStatus.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.1 = warning(4) connUnitState.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.1 = offline(3) See the Fabric Watch Administrator’s Guide on how the switch status is determined. connUnitDeletedTrap Enterprise Variables fcmgmt connUnitId A connUnit has been deleted from this agent. Recommended severity level (for filtering): warning. Not implemented.
8 connUnitPortStatusChange connUnitPortStatusChange Enterprise Variables fcmgmt connUnitPortStatus, connUnitPortState Overall status of the connectivity unit changed. Recommended severity level (for filtering): alert. This trap sends the instance of connUnitPortName as part of the trap; the instance string is NULL, if the port name is not defined for the specified port. Sample trap output for Fabric OS v6.0.0: connUnitPortStatus.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.29 = ready(3) connUnitPortState.
Chapter 9 FCIP MIB Objects This chapter contains descriptions and other information specific to iSCSI MIB object types, including the following: • • • • FCIP MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 249 fcipEntityInstanceTable . . . . . . . . . . . . . . . . . . . . . . 251 fcipLinkTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 FCIP Extended Link Table . . . . . . . . . . . . . . . . . . . . .
9 FCIP MIB Overview FCIP MIB SYSTEM ORGANIZATION OF MIB OBJECTS Figure 67, Figure 68, Figure 69, and Figure 70 depict the high level organization of the FCIP MIB relevant to the supported tables. See RFC4044 for a description of the entire MIB. - iso - org - dod - internet - experimental - mgmt - mib-2 - fcipMIB 1.3.6.1.2.1.224 - fcipObjects - fcipconfig + fcipEntityInstanceTable .4 + fcipLinkTable .5 FIGURE 67 High Level Organization - fcipEntityInstanceEntry 1.3.6.1.2.1.224.1.1.4.1 fcipEntityId 1.3.
fcipEntityInstanceTable 9 fcipEntityInstanceTable The fcipEntityInstancetable has an entry for each configured IP interface. The fcipEntryId is used to index the FCIP Extended link table, along with the fcipLinkIndex from the FCIP Link Table (fcipLinkTable). fcipEntityInstanceEntry 1.3.6.1.2.1.224.1.1.4.1 An fcipEntityInstanceEntry is an entry in the fcipEntityInstanceTable that represents an IP interface configured on a 7500 or on an FC4-18i blade. There is an entry for each configured IP interface.
9 fcipEntityTcpConnPort 1.3.6.1.2.1.224.1.1.4.1.5 fcipEntityTcpConnPort 1.3.6.1.2.1.224.1.1.4.1.5 A TCP port other than the FCIP Well-Known port on which the FCIP entity listens for new TCP connection requests. It contains the value zero (0) if the FCIP Entity only listens on the Well-Known port. The default is 0. Not used. fcipEntitySeqNumWrap 1.3.6.1.2.1.224.1.1.4.1.6 An indication of whether the FCIP Entity supports protection against sequence number wrap Not used. ifcipEntityPHBSupport 1.3.6.1.2.1.
fcipLinkIndex 1.3.6.1.2.1.224.1.1.5.1.1 • • • • • • • • 9 fcipLinkLocalFcipEntityAddressType 1.3.6.1.2.1.224.1.1.5.1.5 fcipLinkLocalFcipEntityAddress 1.3.6.1.2.1.224.1.1.5.1.6 fcipLinkRemFcipEntityWWN 1.3.6.1.2.1.224.1.1.5.1.7 fcipLinkRemFcipEntityId 1.3.6.1.2.1.224.1.1.5.1.8 fcipLinkRemFcipEntityAddressType 1.3.6.1.2.1.224.1.1.5.1.9 fcipLinkRemFcipEntityAddress 1.3.6.1.2.1.224.1.1.5.1.10 fcipLinkStatus 1.3.6.1.2.1.224.1.1.5.1.11 fcipLinkCreateTime 1.3.6.1.2.1.224.1.1.5.1.12 fcipLinkIndex 1.3.6.1.2.1.
9 fcipLinkRemFcipEntityAddressType 1.3.6.1.2.1.224.1.1.5.1.9 fcipLinkRemFcipEntityAddressType 1.3.6.1.2.1.224.1.1.5.1.9 The type of Internet address contained in the corresponding instance of fcipLinkRemFcipEntityAddress. Only address types IPv4 and IPv6 are supported. fcipLinkRemFcipEntityAddress 1.3.6.1.2.1.224.1.1.5.1.10 The Internet address for the remote end of this FCIP Link. The format of this object is determined by the value of the fcipLinkRemFcipEntityAddressType object. fcipLinkStatus 1.3.6.
fcipExtendedLinkTcpDropped Packets 9 fcipExtendedLinkTcpDropped Packets A counter containing the number of packets lost for FC control traffic and data transfer over an FCIP tunnel. fcipExtendedLinkTcpSmoothedRTT The round trip time (latency) in milleseconds for a transfer over an FCIP tunnel. fcipExtendedLinkCompressionRatio The ratio between compressed bytes and raw bytes over an FCIP tunnel. fcipExtendedLinkBytes The total number of raw bytes received over an FCIP tunnel.
9 256 fcipExtendedLinkIfIndex Fabric OS MIB Reference 53-1000602-01
Chapter iSCSI MIB Objects 10 This chapter contains descriptions and other information specific to iSCSI MIB object types, including the following: • • • • • • iSCSI MIB Overview. . . . . . . . . . . . . . . . . . . . . . . . . . 257 iscsiInstanceAttributesTable . . . . . . . . . . . . . . . . . . 261 iscsiNodeAttributesTable . . . . . . . . . . . . . . . . . . . . . 263 iscsiSessionAttributesTable . . . . . . . . . . . . . . . . . . . 267 iscsiSessionStatsTable . . . . . . . . . . . . . . . . . . . . .
10 iSCSI MIB Overview ISCSI MIB SYSTEM ORGANIZATION OF MIB OBJECTS Figure 71 to Figure 76 depict the high level organization of the iSCSI MIB relevant to the supported tables. See RFC4544 for a description of the entire MIB.
iSCSI MIB Overview 10 - iscsiNodesAttributesEntry iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 iscsiNodeName 1.3.6.1.2.1.142.1.1.5.1.1.2 iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 iscsiNodeTransportType 1.3.6.1.2.1.142.1.1.5.1.1.5 iscsiNodeInitialR2T 1.3.6.1.2.1.142.1.1.5.1.1.6 iscsiNodeImmediateData 1.3.6.1.2.1.142.1.1.5.1.1.7 iscsiNodeMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.5.1.1.8 iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9 iscsiNodeMaxBurstLength 1.3.6.
10 iSCSI MIB Overview - iscsiSessionsStatsEntry iscsiSsnCmdPDUs 1.3.6.1.2.1.142.1.1.10.2.1.1 iscsiSsnRspPDUs 1.3.6.1.2.1.142.1.1.10.2.1.2 iscsiTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.3 iscsiRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.4 iscsiLCTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.5 iscsiLCRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.6 FIGURE 75 iscsi SessionStatsTable Hierarchy - iscsiConnectionAttributesEntry iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 iscsiCxnCid 1.3.6.1.2.1.142.1.1.11.1.1.2 iscsiCxnState 1.
iscsiInstanceAttributesTable 10 iscsiInstanceAttributesTable The iscsiInstanceAttributesTable is the primary table of the iSCSI MIB module. Every table entry is owned by exactly one iSCSI instance. iscsiInstanceAttributesEntry An isciInstanceAttributesEntry comprises the following attributes. • • • • • • • • • • • • • iscsiInstIndex 1.3.6.1.2.1.142.1.1.1.1.1 iscsiInstDescr 1.3.6.1.2.1.142.1.1.1.1.2 iscsiInstVersionMin 1.3.6.1.2.1.142.1.1.1.1.3 iscsiInstVersionMax 1.3.6.1.2.1.142.1.1.1.1.
10 iscsiInstVersionMax 1.3.6.1.2.1.142.1.1.1.1.4 iscsiInstVersionMax 1.3.6.1.2.1.142.1.1.1.1.4 The maximum version number of the iSCSI specification supported by this iSCSI instance. This value is hard coded to 0 in this implementation. iscsiInstVendorID 1.3.6.1.2.1.142.1.1.1.1.5 A UTF-8 string describing the manufacturer of the implemention of this instance. Not supported. iscsiInstVendorVersion 1.3.6.1.2.1.142.1.1.1.1.
iscsiInstLastSsnRmtNodeName 1.3.6.1.2.1.142.1.1.1.1.12 10 iscsiInstLastSsnRmtNodeName 1.3.6.1.2.1.142.1.1.1.1.12 The iSCSI name of the remote node from the failed session. Not supported. iscsiInstDiscontinuityTime 1.3.6.1.2.1.142.1.1.1.1.13 The value of SysUpTime at the most recent occurence of a discontinuity in one or more counters used by this instance. Not supported. iscsiNodeAttributesTable This table is a list of iSCSI nodes per each iSCSI instance present on the local system.
10 iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 An arbitrary integer that uniquely identifies a particular node within an iSCSI instance. This is not accesible. This index value must not be modified or reused by an agent unless a reboot has occurred. Agents should attempt to keep this value persistent across reboots. iscsiNodeName 1.3.6.1.2.1.142.1.1.5.1.1.2 This node’s iSCSI name.
iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9 10 Not supported. iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9 The maximum length in bytes supported for unsolicited data to/from this node. Not supported. iscsiNodeMaxBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.10 The maximum number of bytes that can be sent within a single sequence of data-in or data-out PDUs. Not supported. iscsiNodeMaxConnections 1.3.6.1.2.1.142.1.1.5.1.1.
10 iscsiNodeErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.5.1.1.16 Not supported. iscsiNodeErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.5.1.1.16 The Error Recovery Level preference of this node. Not supported. iscsiNodeDiscontinuityTime 1.3.6.1.2.1.142.1.1.5.1.1.17 The value of SysUpTime at the most recent occurence of a discontinuity in one or more counters used by this node. Not supported. iscsiNodeStorageType 1.3.6.1.2.1.142.1.1.5.1.1.18 The storage type for all read-write objects within this row.
iscsiSessionAttributesTable 10 iscsiSessionAttributesTable The isciSessionAttributesTable contains a set of rows that list the sessions known to exist locally for each node in the iSCSI instance. This table contains session negotiable parameters, the target name, the initiator name, the tsid, and the isid. iscsiSessionsAttributesEntry An iscsiSessionsAttributesEntry comprises the following attributes. • • • • • • • • • • • • • • • • • • • • • iscsiSsnNodeIndex 1.3.6.1.2.1.142.1.1.10.1.1.
10 iscsiSsnIndex 1.3.6.1.2.1.142.1.1.10.1.1.2 iscsiSsnIndex 1.3.6.1.2.1.142.1.1.10.1.1.2 An arbitrary integer that uniquely identifies a particular node within an iSCSI instance present on the local system. This value is not accesible.This index value must not be modified or reused by an agent unless a reboot has occurred. Agents should attempt to keep this value persistent across reboots. iscsiSsnDirection 1.3.6.1.2.1.142.1.1.10.1.1.3 Indicates the direction of the iSCSI session.
iscsiSsnTargetAlias 1.3.6.1.2.1.142.1.1.10.1.1.9 10 iscsiSsnTargetAlias 1.3.6.1.2.1.142.1.1.10.1.1.9 A UTF-8 string that gives the alias communicated by the target end of the session during the login phase If no alias exists, the value is a zero-length string. iscsiSsnInitialR2T 1.3.6.1.2.1.142.1.1.10.1.1.10 If set to true, indicates that the initiator must wait for an R2T before sending to the target.
10 iscsiSsnDataSequenceInOrder 1.3.6.1.2.1.142.1.1.10.1.1.18 iscsiSsnDataSequenceInOrder 1.3.6.1.2.1.142.1.1.10.1.1.18 False indicates that iSCSI data PDU sequences may be transferred in any order. True indicates that data PDU sequences must be transferred using continuously increasing offsets, except during error recovery.The default value for this is True. iscsiSsnDataPDUInOrder 1.3.6.1.2.1.142.1.1.10.1.1.19 False indicates that iSCSI data PDUs within sequences may be in any order.
iscsiSessionStatsTable 10 iscsiSessionStatsTable The isciSessionStatsTable contains performance statistics based on iSCI data bytes and PDUs. iscsiSessionsStatsEntry An iscsiSessionsStatsEntry comprises the following attributes. • • • • • • iscsiSsnCmdPDUs 1.3.6.1.2.1.142.1.1.10.2.1.1 iscsiSsnRspPDUs 1.3.6.1.2.1.142.1.1.10.2.1.2 iscsiTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.3 iscsiRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.4 iscsiLCTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.5 iscsiLCRxDataOctets 1.3.6.1.2.1.
10 iscsiLCRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.6 iscsiLCRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.6 A Low Capacity shadow object of iscsiSsnRxDataOctets for those systems that don't support Counter64. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime. Not supported.
iscsiConnectionAttributesTable 10 iscsiConnectionAttributesTable The isciConnectionAttributesTable contains a list of active connections within each session. iscsiConnectionAttributesEntry An iscsiConnectionAttributesEntry comprises the following attributes. • • • • • • • • • • • • • • • • iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 iscsiCxnCid 1.3.6.1.2.1.142.1.1.11.1.1.2 iscsiCxnState 1.3.6.1.2.1.142.1.1.11.1.1.3 iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4 iscsiCxnLocalAddr 1.3.6.1.2.1.142.1.1.11.1.
10 iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4 • logout - A valid iSCSI logout command has been sent or received, but the transport protocol connection has not yet been closed. iscsiCxnState is hard coded to value "full" iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4 The type of Internet Network Addresses contained in the corresponding instances of iscsiCxnLocalAddr and iscsiCxnRemoteAddr. The value 'dns' is not allowed.iscsiCxnAddrType is hard coded to the value ipv4. iscsiCxnLocalAddr 1.3.6.1.2.1.
iscsiCxnHeaderIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.12 10 iscsiCxnHeaderIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.12 This object identifies the iSCSI header digest scheme in use within this connection. iscsiCxnDataIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.13 This object identifies the iSCSI data digest scheme in use within this connection. iscsiCxnRecvMarker 1.3.6.1.2.1.142.1.1.11.1.1.14 This object identifies whether or not this connection is receiving markers in its incoming data stream. Hard coded to false.
10 276 iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.
Appendix MIB Object Groupings A This appendix provides a function-based listing of MIB objects. To see the correlation of various switch objects to MIB objects, including the following: • • • • • • Switch Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 Sensor Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 Port Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 Event Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A Event Variables • • • • • Fx_Port Configuration Table . . . . . . . . . . . . . . . . . . . . 81 fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1. . . . . . . . . 61 Fx_Port Physical Level Table . . . . . . . . . . . . . . . . . . . 61 fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 . . . . . . . . . . . 70 Fibre Channel Port Group. . . . . . . . . . . . . . . . . . . . . 150 Variables for Statistics and Measurement • • • • Statistics Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iSCSI Instance Information Variables A iSCSI Instance Information Variables MIB variables that assist in gathering information about iSCSI instances are in the following tables: • • • • • Fabric OS MIB Reference 53-1000602-01 iscsiInstanceAttributesTable . . . . . . . . . . . . . . . . . . 261 iscsiNodeAttributesTable . . . . . . . . . . . . . . . . . . . . . 263 iscsiNodeAttributesTable . . . . . . . . . . . . . . . . . . . . . 263 iscsiSessionStatsTable . . . . . . . . . . . . . . . . . . . . . . .
A 280 iSCSI Instance Information Variables Fabric OS MIB Reference 53-1000602-01
Appendix B MIB OIDs and Their Matching Object Names This appendix provides a listing of the MIB object names and the corresponding MIB Object ID (OID) associated with each. MIB OIDs The following matrix allows you to identify a MIB object name according to its related OID. TABLE 24 Fabric OS MIB Reference 53-1000602-01 MIB Object Name/OID Matrix MIB Object Name OID Page No. iso 1 page 50 org 1.3 page 50 dod 1.3.6 page 50 internet 1.3.6.1 page 50 directory 1.3.6.1.1 page 50 mgmt 1.
B MIB OIDs TABLE 24 282 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 page 59 fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 page 59 fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 page 59 fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4 page 59 fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5 page 59 fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 page 59 fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 page 59 fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1000602-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortClass2SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.8 page 64 fcFxPortClass3SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.9 page 64 fcFxPortNxPortName 1.3.6.1.2.1.75.1.2.3.1.10 page 64 fcFxPortConnectedNxPort 1.3.6.1.2.1.75.1.2.3.1.11 page 65 fcFxPortBbCreditModel 1.3.6.1.2.1.75.1.2.3.1.12 page 65 fcFeError 1.3.6.1.2.1.75.1.3 page 65 fcFxPortErrorTable 1.3.6.1.2.1.
B MIB OIDs TABLE 24 284 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortC2OutFrames 1.3.6.1.2.1.75.1.4.2.1.2 page 68 fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 page 69 fcFxPortC2OutOctets 1.3.6.1.2.1.75.1.4.2.1.4 page 69 fcFxPortC2Discards 1.3.6.1.2.1.75.1.4.2.1.5 page 69 fcFxPortC2FbsyFrames 1.3.6.1.2.1.75.1.4.2.1.6 page 69 fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7 page 69 fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1000602-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFeErrorGroup 1.3.6.1.2.1.75.2.2.3 fcFeClass1AccountingGroup 1.3.6.1.2.1.75.2.2.4 fcFeClass2AccountingGroup 1.3.6.1.2.1.75.2.2.5 fcFeClass3AccountingGroup 1.3.6.1.2.1.75.2.2.6 fcFeCapabilitiesGroup 1.3.6.1.2.1.75.2.2.7 experimental 1.3.6.1.3 page 73 fibreChannel 1.3.6.1.3.42 page 73 fcFabric 1.3.6.1.3.42.2 page 73 fcFe 1.3.6.1.3.42.2.
B MIB OIDs TABLE 24 286 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 page 84 fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.14 page 84 fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15 page 84 fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16 page 84 fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.17 page 84 fcFxPortTxType 1.3.6.1.3.42.2.1.1.5.1.18 page 84 fcFxPortDistance 1.3.6.1.3.42.2.1.1.5.1.19 page 84 fcFeOp 1.3.6.1.3.42.2.1.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1000602-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortStackedConnModeAgreed 1.3.6.1.3.42.2.1.2.4.1.9 page 89 fcFxPortClass2SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.10 page 89 fcFxPortClass3SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.11 page 89 fcFxPortNxPortName 1.3.6.1.3.42.2.1.2.4.1.12 page 89 fcFxPortConnectedNxPort 1.3.6.1.3.42.2.1.2.4.1.13 page 90 fcFxPortBbCreditModel 1.3.6.1.3.42.2.1.2.4.1.
B MIB OIDs TABLE 24 288 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortCapIntermix 1.3.6.1.3.42.2.1.5.1.1.10 page 93 fcFxPortCapStackedConnMode 1.3.6.1.3.42.2.1.5.1.1.11 page 93 fcFxPortCapClass2SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.12 page 94 fcFxPortCapClass3SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.13 page 94 fcFxPortCapHoldTimeMax 1.3.6.1.3.42.2.1.5.1.1.14 page 94 fcFxPortCapHoldTimeMin 1.3.6.1.3.42.2.1.5.1.1.15 page 94 fcFxPortCapBaudRates 1.3.6.1.3.42.2.1.5.1.1.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1000602-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitContact 1.3.6.1.3.94.1.6.1.23 page 214 connUnitLocation 1.3.6.1.3.94.1.6.1.24 page 214 connUnitEventFilter 1.3.6.1.3.94.1.6.1.25 page 214 connUnitNumEvents 1.3.6.1.3.94.1.6.1.26 page 214 connUnitMaxEvents 1.3.6.1.3.94.1.6.1.27 page 214 connUnitEventCurrID 1.3.6.1.3.94.1.6.1.28 page 215 connUnitRevsTable 1.3.6.1.3.94.1.
B MIB OIDs TABLE 24 290 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitPortRevision 1.3.6.1.3.94.1.10.1.13 page 223 connUnitPortVendor 1.3.6.1.3.94.1.10.1.14 page 223 connUnitPortSpeed 1.3.6.1.3.94.1.10.1.15 page 223 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 page 223 connUnitPortName 1.3.6.1.3.94.1.10.1.17 page 225 connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 page 225 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1000602-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 page 233 connUnitLinkCurrIndex 1.3.6.1.3.94.1.12.1.14 page 233 trapReg 1.3.6.1.3.94.2 page 244 trapMaxClients 1.3.6.1.3.94.2.1 page 244 trapClientCount 1.3.6.1.3.94.2.2 page 244 trapRegTable 1.3.6.1.3.94.2.3 page 244 trapRegEntry 1.3.6.1.3.94.2.3.1 page 244 trapRegIpAddress 1.3.6.1.3.94.2.3.1.
B MIB OIDs TABLE 24 292 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitPortStatCountClass2FBSYFrames 1.3.6.1.3.94.4.5.1.22 page 237 connUnitPortStatCountClass2PBSYFrames 1.3.6.1.3.94.4.5.1.23 page 237 connUnitPortStatCountClass2FRJTFrames 1.3.6.1.3.94.4.5.1.24 page 238 connUnitPortStatCountClass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 page 238 connUnitPortStatCountClass3RxFrames 1.3.6.1.3.94.4.5.1.26 page 238 connUnitPortStatCountClass3TxFrames 1.3.6.1.3.94.4.5.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1000602-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 page 242 connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 page 242 connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.1.3 page 242 connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 page 242 connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.5 page 243 connUnitSnsClassOfSvc 1.3.6.1.3.94.5.2.1.1.6 page 243 connUnitSnsNodeIPAddress 1.3.6.1.3.94.5.2.1.
B MIB OIDs TABLE 24 294 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 page 140 swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 page 141 swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 page 141 swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18 page 141 swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 page 141 swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 page 141 swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1000602-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFCport 1.3.6.1.4.1.1588.2.1.1.1.6 page 150 swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 page 150 swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 page 150 swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 page 150 swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 page 151 swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 page 151 swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.
B MIB OIDs TABLE 24 296 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 page 155 swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 page 156 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 page 156 swNs 1.3.6.1.4.1.1588.2.1.1.1.7 page 155 swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 page 156 swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 page 156 swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1000602-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 page 161 swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 page 162 swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 page 162 swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 page 162 swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.6 page 162 swFwDefaultBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
B MIB OIDs TABLE 24 298 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFwBehaviorType 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.10 page 169 swFwBehaviorInt 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.11 page 169 swEndDevice 1.3.6.1.4.1.1588.2.1.1.1.21 page 169 swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 page 169 swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 page 169 swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 page 170 swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1000602-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swID 1.3.6.1.1.1588.2.1.1.1.1.24 page 144 swEtherIPAddress 1.3.6.1.1.1588.2.1.1.1.1.25 page 144 swEtherIPMask 1.3.6.1.1.1588.2.1.1.1.1.26 page 144 swFCIPAddress 1.3.6.1.1.1588.2.1.1.1.1.27 page 144 swFCIPMask 1.3.6.1.1.1588.2.1.1.1.1.28 page 144 swFabricMemTable 1.3.6.1.1.1588.2.1.1.1.2.10 page 147 swFabricMemEntry 1.3.6.1.1.1588.2.1.1.1.2.10.
B MIB OIDs TABLE 24 300 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 page 175 swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 page 175 swTrunkGrpNumber 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.1 page 175 swTrunkGrpMaster 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.2 page 175 swTrunkGrpTx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 page 176 swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4 page 176 sw28k 1.3.6.1.4.1.1588.2.1.1.
Index A E accounting group, 67, 92 address translation group, 24 agtcfgDefault command, 10 agtcfgSet command, 10 agtcfgShow command, 10 ASIC performance monitoring group, 172 EGP group, 40 end device group, 169 Entity MIB conformance information, 114 Entity MIB objects, 100 Entity MIB overview, 95 Entity MIB system organization of MIB objects, 96 Entity MIB trap, 114 error group, 65, 90 errShow command, 4 event group, 159 event variables, 278 B before loading MIBs, 6 Brocade MIB files, 6 C capability
H ha MIB overview, 177 ha-MIB traps, 184 ha-MIB traps and sample triggers, 186 high-availability group, 179 port variables, 277 R revision number scalar, 246 I S ICMP group, 32 interfaces group, 20 interfaces table, 20 IP group, 25 iSCSI, 257, 258 iSCSI MIB Organization, 250, 258 iSCSI MIB Overview, 249, 257 ISL and end device variables, 278 sensor variables, 277 sensorShow command, 9 Series 3000 Variables, 278, 279 service group, 241 SNMP configuration variables, 278 SNMP group, 40 SNMP trap registra
understanding SNMP bASICs, 2 unsupported tables, 246 unsupported traps, 246 Fabric OS MIB Reference 53-1000602-01 3
4 Fabric OS MIB Reference 53-1000602-01
