Brocade Fabric OS v6.4.3f Release Notes v1.0
Fabric OS v6.4.3f Release Notes v1.0 Page 80 of 149
Closed with Code Change in Fabric OS v6.4.2a – GA July 22, 2011
This section lists the defects with Critical, High and Medium Technical Severity closed with a code change as of
July 22, 2011 in Fabric OS v6.4.2a.
Defect ID: DEFECT000300506
Technical Severity: High
Summary: Observed routing problem after switch running in fmsmode (FICON) changed FID
assignment
Symptom: Connectivity problems in the fabric after changing FID assignment, switch in fabric reported
[RTWR-1002] and [RTWR-1003] RAS log messages
Workaround: Reboot or power cycle the affected switch or switches
Feature: 8G ASIC Driver
Function: C2 ASIC driver
Probability: Medium
Found in Release: FOS6.4.0
Defect ID: DEFECT000342905
Technical Severity: High
Summary: FX8-24 missing route to active F port in that logical switch after FCIP Tunnel Bounce. All
frames after port bounce to that destination are dropped as non-routable
Symptom: Connectivity to a device could be lost after FCIP tunnel bounce
Feature: Striker/Spike Platform Services
Function: Routing
Probability: Low
Found in Release: FOS6.4.0
Defect ID: DEFECT000344506
Technical Severity: High
Summary: Port fenced during supportsave
Symptom: Port without errors are fenced during supportsave
Feature: FABRIC WATCH
Function: PORT FENCING
Probability: High
Found in Release: FOS6.4.0
Defect ID: DEFECT000345665
Technical Severity: High
Summary: During aptpolicy change, routing mask is not being set correctly when changing from
exchange to port based routing, leading to out of order frames.
Symptom: If this unlikely issue is encountered, I/O errors will result from out of order delivery of
frames within a sequence
Feature: 8G ASIC Driver
Function: C2 ASIC driver
Probability: Low
Found in Release: FOS6.4.0
Service Request ID: 589543