Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

206 Fabric Manager Administrator’s Guide
53-10000610-02
File transfer options configuration
15
FIGURE 137 Viewing switch firmware information in your SAN
Viewing SAN firmware information
1. Choose Tasks > Firmware Management > SAN Firmware Information View.
The SAN Firmware Information window appears, as shown in Figure 137.
2. From the fabric tree, select the element whose switch information you want to view.
3. Optional: Click Print to print the firmware information.
File transfer options configuration
You must set up file transfer options before you can transfer files from a host IP to the remote IP of
a switch using the File Transfer Protocol (FTP). The FTP server must allow read and write access
from the Fabric Manager server for these options to work correctly. You can choose either the FTP
server included with Fabric Manager or your own external FTP server.
NOTE
If both FTP servers are configured to start automatically after an OS reboot, the external FTP server
starts first and uses port 21. In this case, the Fabric Manager FTP server will not be started.
Configuring file transfer options
1. Select Edit > Preferences.
2. Expand Server specific and select File Transfer.