Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 299
53-10000610-02
FCIP tunnel management
21
FIGURE 197 FCIP tunnel details
2. Click Close to close the dialog box.
Modifying FCIP tunnels
NOTE
You cannot modify an active tunnel; disable the tunnel before making changes.
1. On the FCIP Tunnel tab, right-click the tunnel to be modified and select Modify FCIP tunnel.
You are prompted for confirmation, as shown.
2. Read the information on the dialog and click Modify FCIP Tunnel.
You cannot select switches or fabrics at this point.
3. The Modify FCIP Tunnel wizard displays.
4. Follow the instructions in the wizard to make any desired changes. Keep the following items in
mind:
• You cannot edit the GigE port or the tunnel ID.
• You do not edit the IP interface but select another IP interface or create a new one.
• The gateway can be modified if the existing route to the destination subnet is deleted and
a new one added.