Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

328 Fabric Manager Administrator’s Guide
53-10000610-02
Authentication information
26
Click Authentication Audit Trail to display the log file messages from the current month and the
previous month.
Changing authentication information
1. Click the Authentication tab.
2. Click Edit.
The Edit Authentication Information wizard appears, as shown in Figure 219. The wizard fields
are populated with the existing authentication configuration.
3. Follow the instructions in the wizard to select an authentication method and configure the
appropriate parameters.
If you choose to edit the current authentication information, the fields are populated with the
existing settings. If you switch to a different authentication method, you must enter all of the
configuration parameters for that method.
NOTE
If you select NIS Authentication (for Solaris or Linux), you must provide both the NIS ServerName/IP
address and the NIS Domain Name to configure this authentication method.
FIGURE 219 Edit Authentication Information wizard