Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

354 Fabric Manager Administrator’s Guide
53-10000610-02
Fabric discovery problems
A
#wrapper.java.additional.19=-Dserver.network.interface.sb=<ip.address>
for example,
wrapper.java.additional.19=-Dserver.network.interface.sb=192.168.22.131
3. Open <FM Server Install folder>/server/conf ftpservice.conf.
4. Uncomment the following entry and provide a reachable IP interface of the server:
#wrapper.java.additional.5=-Dserver.network.interface.sb=
for example,
wrapper.java.additional.5=-Dserver.network.interface.sb=192.168.22.131
5. Save the files.
6. Launch Server Management Console and restart the Fabric Manager server services.
Fabric discovery problems
If you are having fabric discovery problems, identify the problem (see below) and try the
recommended solution:
• Switch does not exist or there is no Ethernet path to the switch.
Attempt to ping the switch from both the client and the server.
• IP address is not properly formed.
Fix the IP address and/or URL of the switch.
• Seed switch name is unknown to the DNS.
Check the DNS configuration.
• HTTP service on the switch is not running (or is running too slowly).
Attempt to use Web Tools through the client.
• Fabric was reconfiguring or unstable at the time of the attempted launch.
Use the fabricshow command to see if the fabric is stable.
• Switch does not have Web Tools license.
Attempt to use Web Tools through the client host.
• Switch cannot deliver Fabricinfo.html.
It is not a Brocade switch.
• Seed switch is already monitored in another fabric.
Check all of the loaded unmonitored fabrics on the client GUI.
• Client has lost connection to the server (or server is down).
Launch the Server Management Console, click the Services tab, and then click Restart
Services to stop and restart the Fabric Manager server process. See Chapter 26, “Server
Management Console” for additional information.
• Database is not running.
Launch the Server Management Console, click the Services tab, and then click Restart
Services to stop and restart the Fabric Manager server process. See “Fabric Manager
services” on page 326 for additional information.