Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

50 Fabric Manager Administrator’s Guide
53-10000610-02
Fabric Manager Customization
3
Fabric Manager provides several methods for you to access modules and execute tasks:
• From the menu bar
• From the Task panel
• From the right-click context menu
When describing how you can access a module or task, this document describes one way you can
do it; however, note that there might be other ways to access the same module or task.
Fabric Manager Customization
This section describes several ways to change the look and feel of Fabric Manager.
• “Displaying fabrics by IP address, domain ID, WWN, and name,” next
• “Tables” on page 50
• “Table element filtering” on page 53
• “Table tool tip customization” on page 54
• “Resizing panels” on page 54
Displaying fabrics by IP address, domain ID, WWN, and name
You can display the SAN elements by the identifier that you find most useful.
To select the identifier, click (Name, WWN, IP, or Domain ID) from the Display By menu in the Scope
panel, as shown in Figure 32.
FIGURE 32 Selecting how to identify SAN elements
Tables
You can customize the tables in the Information panel to display only the information you want to
see, in the order you want to see it. You can also sort the order of the columns and the order of the
information displayed in the columns.
Customizing the contents displayed in a table
1. In the Information panel, click Actions and select Customize.
The Customize Columns window displays the available columns for the table, as shown in
Figure 33. A check next to a column name indicates that the column is displayed in the table.