HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

Fabric OS 6.x administrator guide 327
To delete a port mirror connection between two local switch ports or a local and a remote switch port:
1. Log in to the switch as admin.
2. Type portMirror --del SourceID DestID.
For example, to delete the port mirror connection on mirror port 2, you might type:
portMirror --del 0x011400 0x240400
To display port mirror connections:
1. Log in to the switch as admin.
2. Type portMirror --show.
You should see output similar to the following:
switch:admin> portmirror --show
Number of mirror connection(s) configured: 4
Mirror_Port SID DID State
----------------------------------------
18 0x070400 0x0718e2 Enabled
18 0x070400 0x0718e3 Enabled
18 0x070400 0x0718ef Enabled
18 0x070400 0x0718e0 Enabled
The switchShow command output shows the mirror port as shown in the following example.
switch:admin> switchshow
switchName: ABCD
switchType: 26.1
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:05:1e:34:00:70
zoning: OFF
switchBeacon: OFF
Area Port Media Speed State Proto
=====================================
0 0 id N2 In_Sync
1 1 id N2 Online F-Port 21:00:00:e0:8b:13:08:10
2 2 id N2 No_Light
3 3 -- N2 No_Module
4 4 -- N2 No_Module
5 5 id N2 No_Light
6 6 -- N2 No_Module
7 7 -- N2 No_Module
8 8 id N2 No_Light
9 9 id N2 No_Light
10 10 -- N2 No_Module
11 11 -- N2 No_Module