HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

Fabric OS 6.x administrator guide 331
output indicates whether or not a port is an NPIV F_Port, and identifies the number of virtual N_Ports
behind it. Following is sample output from the switchShow command:
switch: admin> switchshow
switchName:swd77
switchType:32.0
switchState: Online
switchMode:Native
switchRole:Principal
switchDomain: 99
switchId:fffc63
switchWwn:10:00:00:05:1e:35:37:40
zoning: OFF
switchBeacon:OFF
Area Port Media Speed State
==============================
0 0 id N2 Online F-Port 50:05:07:64:01:20:73:b8
1 1 id N2 Online F-Port 50:05:07:64:01:60:73:b8
2 2 id N2 Online F-Port 65 NPIV public
3 3 id N2 Online F-Port 50:05:07:64:01:e0:73:b8
4 4 id N2 Online F-Port 50:05:07:64:01:20:73:b5
...
<output truncated>
Use the portShow command to view the NPIV attributes and all the N_Port (physical and virtual) port
WWNs under “portWwn of device(s) connected.” Following is sample output for the portShow
command:
switch:admin> portshow 2
portName: 02
portHealth: HEALTHY
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x24b03 PRESENT ACTIVE F_PORT G_PORT NPIV LOGICAL_ONLINE LOGIN
NOELP LED ACCEPT
portType: 10.0
portState: 1Online
portPhys: 6In_Sync
portScn: 32F_Port
port generation number: 148
portId: 630200
portIfId: 43020005
portWwn: 20:02:00:05:1e:35:37:40
portWwn of device(s) connected:
c0:50:76:ff:fb:00:16:fc
c0:50:76:ff:fb:00:16:f8
...