Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 117
53-10000610-02
End-to-end monitoring
8
Disabling performance monitoring
1. Log in to the seed switch of the fabric you want to monitor.
2. Select the fabric in the View panel and select Tasks > Performance Monitoring > Configure
End-to-End Monitoring.
The Performance Monitoring Configuration dialog box displays, shown in Figure 76.
FIGURE 76 Enabling/disabling end-to-end monitoring
3. Select Off and then click Save to stop the collection of end-to-end statistics. End-to-end ports
are removed from the fabric when you stop the end-to-end monitoring.
To stop the collection of individual switch port data, click Off in the Port Rx/Tx History section.
4. Click Save.
Disabling port data performance monitoring
1. Select the fabric in the View panel and select Tasks > Performance Monitoring > Configure Port
Data Collection and Alerts.
The Configure Port Data Collection and Alerts dialog box displays.
2. Clear the Enable port data collection for selected fabric check box, as shown in Figure 77.
FIGURE 77 Enabling/disabling port data collection
3. Click Apply, then click OK.